Wind-Driven SEIGs for Supplying Isolated Loads Employing DSP Based Power Electronic Controllers

A DSP based closed-loop system has been developed for wind-driven three-phase SelfExcited Induction Generators ( SEIGs) using a diode bridge rectifier ( DBR) followed by an IGBT inverter. This system is meant for supplying isolated ac loads with a voltage of constant magnitude and frequency, for any operating condition of varying nature of wind speed and consumer load. The configuration and implementation of this proposed system have been fully described. The detailed method of analysing and predetermining the performance characteristics of such stand-alone systems has also been explained. Test results obtained on an SEIG operated with the controller built in the laboratory, demonstrate the successful working of both the hardware and software of the control scheme and the usefulness of the set-up as a whole for supplying isolated ac loads. With the varying nature of wind speed, a method of meeting the power balance between the wind power available and the load power requirement has also been explained with extensive Simulation studies.