INFLUENCE OF NICKEL AND MOLYBDENUM ON THE PHASE-STABILITY AND MECHANICAL-PROPERTIES OF MARAGING STEELS

The effect of nickel and molybdenum concentrations on the phase transformation and mechanical properties of conventional 18Ni(350) maraging steel has been investigated. Both of these elements act as strong austenite stabilizers. When the concentration of molybdenum or nickel is greater than 7.5 or 24 wt%, respectively, the austenite phase remains stable up to room temperature. In both molybdenum- and nickel-alloyed steels, the austenite phase could be transformed to martensite by either dipping the material in liquid nitrogen or subjecting it to cold working. When 7.5 wt% Mo and 24 wt% Ni were added in combination, however, the austenite phase obtained at room temperature did not transform to martensite when liquid-nitrogen quenched or even,when cold rolled to greater than 95% reduction. The aging response of these materials has also been investigated using optical, scanning electron, and scanning transmission electron microscopy.