PREDICTION OF SPECIFIC CUTTING FORCE AND CUTTING FORCE RATIO IN TURNING

被引：8
|
作者：
LEE, BY
TARNG, YS
机构：
[1] NATL TAIWAN INST TECHNOL,DEPT MECH ENGN,TAIPEI 10672,TAIWAN
[2] NATL YUNLIN POLYTECH INST,DEPT MECH MANUFACTURE ENGN,TAIPEI 63208,TAIWAN
来源：
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY | 1994年 / 41卷 / 01期
关键词：
D O I：
10.1016/0924-0136(94)90177-5
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
Presented in this paper is a model which enables the prediction of the specific cutting force and the cutting force ratio in metal cutting, based on a predictive machining theory using a shear-zone model of chip formation. An important feature of this model is that the variations of the flow-stress properties of the work material with strain, strain-rate, and temperature and of the thermal properties of the work material with temperature and chemical composition are taken into consideration. Good correlation between the predicted and measured specific cutting forces and cutting force ratios in the turning operation is demonstrated.
引用
收藏
页码：71 / 82
页数：12
相关论文
共 50 条
  • [1] Research on the Influence of the Cutting Speed on the Specific Cutting Force During Turning
    Velchev, Stefan
    Kolev, Ivan
    Ivanov, Krassimir
    STROJNISKI VESTNIK-JOURNAL OF MECHANICAL ENGINEERING, 2009, 55 (06): : 400 - 405
  • [2] Prediction of cutting force for precise control of thrust force during turning processing
    1600, Japan Society for Precision Engineering (80):
  • [3] Prediction of Surface Roughness on CNC Turning based on Monitoring of Cutting Force and Cutting Temperature
    Tangjitsitcharoen, Somkiat
    MATERIAL DESIGN, PROCESSING AND APPLICATIONS, PARTS 1-4, 2013, 690-693 : 2540 - 2549
  • [4] Prediction of Cutting Force in Turning Process-an Experimental Approach
    Thangarasu, S. K.
    Shankar, S.
    Thomas, A. Tony
    Sridhar, G.
    INTERNATIONAL CONFERENCE ON ADVANCES IN MATERIALS AND MANUFACTURING APPLICATIONS (ICONAMMA-2017), 2018, 310
  • [5] Prediction of cutting force in turning process: An experimental and fuzzy approach
    Shankar, S.
    Thangarasu, S. K.
    Mohanraj, T.
    Pravien, D. S.
    JOURNAL OF INTELLIGENT & FUZZY SYSTEMS, 2015, 28 (04) : 1785 - 1793
  • [6] Fuzzy-grey Prediction of Cutting Force Uncertainty in Turning
    WANG Wei-ping 1
    2.Department of Computer Science
    厦门大学学报(自然科学版), 2002, (S1) : 302 - 302
  • [7] A comprehensive dynamic cutting force model for chatter prediction in turning
    Rao, BC
    Shin, YC
    INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE, 1999, 39 (10): : 1631 - 1654
  • [8] A grey prediction fuzzy controller for constant cutting force in turning
    Lian, RJ
    Lin, BF
    Huang, JH
    INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE, 2005, 45 (09): : 1047 - 1056
  • [9] Fuzzy-grey prediction of cutting force uncertainty in turning
    Wang, WP
    Peng, YH
    Li, XY
    JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, 2002, 129 (1-3) : 663 - 666
  • [10] Investigation of the specific cutting force and its direction factors in turning
    Tarng, Y.S.
    Hwang, T.S.
    Computers and Structures, 1994, 53 (04): : 937 - 945
12345