CONSTITUTION OF AL RICH ALLOYS OF AL-CU-MG-LI SYSTEM

被引:0
|
作者
LAWSONJACK, SG [1 ]
FLOWER, HM [1 ]
WEST, DRF [1 ]
机构
[1] IMPERIAL COLL SCI TECHNOL & MED,DEPT MAT,LONDON,ENGLAND
关键词
D O I
10.1179/mst.1993.9.7.562
中图分类号
T [工业技术];
学科分类号
08 ;
摘要
The influence of the addition of between 1.5 and 2.5 wt-%Li on the phase equilibria of ternary Al-(similar to 13-26)Cu-(similar to 7-12)Mg (wt-%) alloys has been investigated as a basis for understanding the phase transformations which occur within the Al-Cu-Mg-Li quaternary system. Alloys as cast and also annealed at 500 or 510 degrees C were examined using light microscopy and scanning electron microscopy (including phase compositional analyses), secondary ion mass spectroscopy, X-ray diffraction, and differential scanning calorimetry. Three phases based on the Al-Cu-Mg system were identified as products of solidification: a (Al based solid solution), S (Al2CuMg), and T (Al6CuMg4). A phase designated S* and having a higher Li content than S but of similar stoichiometry based on Al2Cu(Mg,Li) also formed during solidification. The X-ray diffraction pattern of the S* phase was similar to that of R (Al5CuLi3) phase. The addition of Li to Al-Cu-Mg alloys leads to primary S* phase formation during solidification with an associated increase in the liquidus in a certain composition range where a phase would form in the ternary Al-Cu-Mg system. The presence of Al-Li phase delta was detected as a product of solid state precipitation.
引用
收藏
页码:562 / 571
页数:10
相关论文
共 50 条
  • [21] Modelling of strengthening of Al-Li-Cu-Mg alloys
    Starink, MJ
    Hobson, AJ
    Gregson, PJ
    ALUMINIUM ALLOYS: THEIR PHYSICAL AND MECHANICAL PROPERTIES, PTS 1-3, 2000, 331-3 : 1321 - 1326
  • [22] ON THE NUCLEATION AND GROWTH OF AL2CUMG (S') IN AL-LI-CU-MG AND AL-CU-MG ALLOYS
    RADMILOVIC, V
    THOMAS, G
    SHIFLET, GJ
    STARKE, EA
    SCRIPTA METALLURGICA, 1989, 23 (07): : 1141 - 1146
  • [23] PHASE-EQUILIBRIA OF AL-RICH AL-CU-MG ALLOYS
    HUANG, CC
    CHEN, SW
    METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, 1995, 26 (04): : 1007 - 1011
  • [24] PHASE-EQUILIBRIUM IN (AL-RICH) AL-MG-LI-SI ALLOYS
    DRITS, ME
    KADANER, ES
    TURKINA, NI
    KUZMINA, VI
    RUSSIAN METALLURGY, 1978, (02): : 181 - 183
  • [25] Density and molar volume of Al-rich Al-Li-Mg solid alloys
    Gasior, W
    Moser, Z
    Pstrus, J
    ARCHIVES OF METALLURGY, 2003, 48 (04): : 497 - 505
  • [26] Al–Cu–Li and Al–Mg–Li alloys: Phase composition, texture, and anisotropy of mechanical properties (Review)
    Betsofen S.Y.
    Antipov V.V.
    Knyazev M.I.
    Russian Metallurgy (Metally), 2016, 2016 (4) : 326 - 341
  • [27] Microstructure and mechanical behaviour of Al-Li-Zr and Al-Li-Cu-Mg-Zr alloys
    Yin, Zhimin
    Weatherly, G.C.
    Aust, K.T.
    Jinshu Xuebao/Acta Metallurgica Sinica, 1988, 24 (05):
  • [28] Creep behavior and microstructural stability of Al-Cu-Mg-Ag and Al-Cu-Li-Mg-Ag alloys
    Univ of Virginia, Charlottesville, United States
    Mater Sci Eng A Struct Mater Prop Microstruct Process, (571-574):
  • [29] Creep behavior and microstructural stability of Al-Cu-Mg-Ag and Al-Cu-Li-Mg-Ag alloys
    Kazanjian, SM
    Wang, N
    Starke, EA
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 1997, 234 : 571 - 574
  • [30] 日本研制出有良好可淬硬性的Al-Cu-Mg-Li合金
    刘先曙
    兵器材料科学与工程, 1991, (11) : 69 - 69