MECHANICAL-PROPERTIES OF MOLYBDENUM DISILICIDE BASED MATERIALS CONSOLIDATED BY HOT ISOSTATIC PRESSING (HIP)

被引：7
作者：
SURYANARAYANAN, R
SASTRY, SML
JERINA, KL
机构：
[1] Materials Science and Engineering Program, Department of Mechanical Engineering, Washington University, St. Louis, MO 63130
来源：
ACTA METALLURGICA ET MATERIALIA | 1994年 / 42卷 / 11期
关键词：
D O I：
10.1016/0956-7151(94)90440-5
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
The influence of hot isostatic pressing (HIP) consolidation parameters on the mechanical properties of molybdenum disilicide (MoSi2) and MoSi2 reinforced with ductile and brittle reinforcements was studied. MoSi2, MoSi2-20 vol.% coarse and fine niobium powder and MoSi2-20 vol.% silicon carbide whiskers consolidated by HIP at 1200-1400-degrees-C, 207 MPa, for 1 and 4 h were tested in compression for elevated temperature strength and creep resistance. Single-edge-notched specimens of the three materials were tested in a three-point bend configuration for fracture toughness. Mechanical properties were related with consolidation parameters and post-HIP microstructures.
引用
收藏
页码：3751 / 3757
页数：7
相关论文
共 48 条
[1]  
Aikin R.M., 1991, CERAM ENG SCI P, V12, P1643
[2]   STRENGTHENING OF DISCONTINUOUSLY REINFORCED MOSI2 COMPOSITES AT HIGH-TEMPERATURES [J].
AIKIN, RM .
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 1992, 155 (1-2) :121-133
[3]   ON THE DUCTILE-TO-BRITTLE TRANSITION-TEMPERATURE IN MOSI2 [J].
AIKIN, RM .
SCRIPTA METALLURGICA ET MATERIALIA, 1992, 26 (07) :1025-1030
[4]   FABRICATION, STRUCTURE AND PROPERTIES OF MOSI2-BASE COMPOSITES [J].
ALMAN, DE ;
SHAW, KG ;
STOLOFF, NS ;
RAJAN, K .
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 1992, 155 (1-2) :85-93
[5]  
ASHBY MF, 1989, ACTA METALL MATER, V37, P184
[6]   HARDNESS AND FRACTURE-TOUGHNESS OF SIC-PARTICLE-REINFORCED MOSI2 COMPOSITES [J].
BHATTACHARYA, AK ;
PETROVIC, JJ .
JOURNAL OF THE AMERICAN CERAMIC SOCIETY, 1991, 74 (10) :2700-2703
[7]   ENGINEERING ASPECT OF CREEP DEFORMATION OF MOLYBDENUM DISILICIDE [J].
BOSE, S .
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 1992, 155 (1-2) :217-225
[8]  
BRAY DJ, 1993, COMMUNICATION
[9]   A TEST PROCEDURE FOR CHARACTERIZING THE TOUGHENING OF BRITTLE INTERMETALLICS BY DUCTILE REINFORCEMENTS [J].
CAO, HC ;
DALGLEISH, BJ ;
DEVE, HE ;
ELLIOTT, C ;
EVANS, AG ;
MEHRABIAN, R ;
ODETTE, GR .
ACTA METALLURGICA, 1989, 37 (11) :2969-2977
[10]  
CARTER DH, 1987, J AM CERAM SOC, V70, pC79, DOI 10.1111/j.1151-2916.1987.tb04992.x
12345