Failure behavior of a rock-coal-rock combined body with a weak coal interlayer

被引:91
作者
Zuo Jianping [1 ,2 ]
Wang Zhaofeng [2 ]
Zhou Hongwei [1 ,2 ]
Pei Jianliang [3 ]
Liu Jianfeng [3 ]
机构
[1] China Univ Min & Technol, State Key Lab Coal Resources & Safe Min, Beijing 100083, Peoples R China
[2] China Univ Min & Technol, Sch Mech & Civil Engn, Beijing 100083, Peoples R China
[3] Sichuan Univ, Coll Hydraul & Hydroelect Engn, Chengdu 610065, Sichuan, Peoples R China
基金
中国国家自然科学基金;
关键词
Rock-coal-rock combined body; Weak coal interlayer; Failure mechanism; Axial failure;
D O I
10.1016/j.ijmst.2013.11.005
中图分类号
TD [矿业工程];
学科分类号
0819 ;
摘要
Using an MTS 815 testing machine, the deformation and failure behavior of a rock-coal-rock combined body containing a weak coal interlayer has been investigated and described in this paper. Uniaxial loading leads to the appearance of mixed cracks in the coal body which induce instability and lead to bursts in coal. If the mixed crack propagates at a sufficiently high speed to carry enough energy to damage the roof rock, then coal and rock bursts may occur - this is the main mechanism whereby coal bumps or coal and rock bursts occur after excavation unloading. With increasing confining pressure, the failure strength of a rock-coal-rock combined body gradually increases, and the failure mechanism of the coal interlayer also changes, from mixed crack damage under low confining pressures, to parallel crack damage under medium confining pressures, and finally to single shear crack damage or integral mixed section damage under high confining pressures. In general, it is shown that a weak coal interlayer changes the form of overall coal damage in a rock-coal-rock combined body and reduces the overall stability of a coal body. Therefore, the whole failure behavior of a rock-coal-rock combined body in large cutting height working faces is controlled by these mechanisms. (C) 2013 Published by Elsevier B.V. on behalf of China University of Mining & Technology.
引用
收藏
页码:907 / 912
页数:6
相关论文
共 15 条
[1]  
Fang H.F., 2012, SCI TECHNOL, V22, P85
[2]  
Han D.X., 1996, COAL PETROLOGY CHINA
[3]  
HE, 2009, MINERAL ENG RES, V24, P1
[4]  
He M.C., 2011, MINING SCI TECHNOLOG, V21, P389
[5]  
Kang H., 2007, ROCK BOLTING THEORY
[6]  
[乔伟 Qiao Wei], 2011, [中国矿业大学学报. 自然科学版, Journal of China University of Mining & Technology], V40, P73
[7]  
[张志强 ZHANG Zhiqiang], 2005, [岩石力学与工程学报, Chinese Journal of Rock Mechanics and Engineering], V24, P3252
[8]  
[王祥秋 Wang Xiangqiu], 2002, [岩土工程学报, Chinese Journal of Geotechnical Engineering], V24, P729
[9]  
[王益壮 WANG Yizhuang], 2011, [防灾减灾工程学报, Journal of Disaster Prevention and Mitigation Engineering], V31, P441
[10]   Deformability characteristics of jointed rock masses under uniaxial compression [J].
Xin, Chen ;
Liao Zhihong ;
Xi, Peng .
INTERNATIONAL JOURNAL OF MINING SCIENCE AND TECHNOLOGY, 2012, 22 (02) :213-221