SYNERGY BETWEEN THE COMOS PHASE AND SUPPORTED OR UNSUPPORTED COBALT SULFIDE - EXISTENCE OF A REMOTE-CONTROL EFFECT

Unsupported Co9S8, MoS2, and CoMoS sulfides (prepared by the HSP method) as well as supported MoS2/Al2O3 and CoSx/C (prepared by impregnation) were used to prepare a series of binary mechanical mixtures of various compositions. A variety of physicochemical techniques (temperature programmed decomposition and sulfidation, both followed by subsequent TPO, XRD, TPR, microelectrophoresis, XPS and AEM) were used to study the samples, verify the formation of the ''CoMoS phase'' in the mixed CoMo sulfide and investigate the existence of interactions between the sulfides forming the mechanical mixtures. The catalytic activity of the supported and unsupported HSP sulfides as well as that of the mechanical mixtures was tested in the hydrodesulfurization of thiophene (HDS) and the hydrogenation of cyclohexene (HYD) at 513 K and 3 MPa. The mechanical mixtures exhibit a synergy in HDS and HYD. This shows that cobalt sulfide (supported or unsupported HSP) can promote the activity not only of molybdenum sulfide, but also of the unsupported HSP ''CoMoS phase''. In addition, XRD and AEM (performed before and after catalytic tests) were used to study the evolution of the unsupported ''CoMoS phase'' during the catalytic reaction, ft was found that this phase is unstable; cobalt segregates from the CoMoS association to form Co9S8, even after a relatively short period in the reactor. These results provide more evidence that the remote control mechanism plays a major role in the synergetic behavior of the CoMo hydrotreating catalysts.