AN IMPROVED PERTURBATION AND OBSERVATION BASED MAXIMUM POWER POINT TRACKING METHOD FOR PHOTOVOLTAIC SYSTEMS
被引:0
作者:
Mutlag, Ammar Hussein
论文数: 0引用数: 0
h-index: 0
机构:
Univ Kebangsaan Malaysia, Fac Engn & Built Environm, Dept Elect Elect & Syst Engn, Bangi 43600, Selangor, Malaysia
Middle Tech Univ, Coll Elect & Elect Engn Tech, Baghdad, IraqUniv Kebangsaan Malaysia, Fac Engn & Built Environm, Dept Elect Elect & Syst Engn, Bangi 43600, Selangor, Malaysia
Mutlag, Ammar Hussein
[1
,3
]
Mohamed, Azah
论文数: 0引用数: 0
h-index: 0
机构:
Univ Kebangsaan Malaysia, Fac Engn & Built Environm, Dept Elect Elect & Syst Engn, Bangi 43600, Selangor, MalaysiaUniv Kebangsaan Malaysia, Fac Engn & Built Environm, Dept Elect Elect & Syst Engn, Bangi 43600, Selangor, Malaysia
Mohamed, Azah
[1
]
Shareef, Hussain
论文数: 0引用数: 0
h-index: 0
机构:
1 Lorong Ayer Hitam Kawasan Inst Penyelidikan, Kajang 43000, Selangor, MalaysiaUniv Kebangsaan Malaysia, Fac Engn & Built Environm, Dept Elect Elect & Syst Engn, Bangi 43600, Selangor, Malaysia
Shareef, Hussain
[2
]
机构:
[1] Univ Kebangsaan Malaysia, Fac Engn & Built Environm, Dept Elect Elect & Syst Engn, Bangi 43600, Selangor, Malaysia
[2] 1 Lorong Ayer Hitam Kawasan Inst Penyelidikan, Kajang 43000, Selangor, Malaysia
Perturb and observe algorithm;
maximum power tracking;
photovoltaic;
D O I:
暂无
中图分类号:
T [工业技术];
学科分类号:
08 ;
摘要:
In photovoltaic (PV) system, maximum power tracking (MPPT) is crucial to improve the system performance. Irradiance and temperature are the two important parameters that affect MPPT. The conventional perturbation and observation (P&O) based MPPT algorithm does not accurately track the PV maximum power point. Therefore, this paper presents an improved P&O algorithm (Im-P&O) based on variable perturbation. The idea behind the Im-P&O algorithm is to produce variable step changes in the reference current/voltage for fast tracking of the PV maximum power point. The Im-P&O based MPPT is designed for the 25 SolarTIFSTF-120P6 PV panels, with a capacity of 3 kW peak. A complete PV system is modeled using the MATLAB/Simulink. Simulation results showed that the Im-P&O based MPPT achieved faster and accurate performance compared with the conventional P&O algorithm.