INTERNATIONAL FEDERATION OF CLINICAL-CHEMISTRY STANDARDIZATION PROJECT FOR MEASUREMENTS OF APOLIPOPROTEIN-A-I AND APOLIPOPROTEIN-B .4. COMPARABILITY OF APOLIPOPROTEIN-B VALUES BY USE OF INTERNATIONAL REFERENCE MATERIAL

We performed temporal and thermal stability studies on SP3-07, a liquid-stabilized reference material for apolipoprotein (ape) B, selected during the previous phase of the International Federation of Clinical Chemistry project on standardization of apolipoprotein measurements. Results indicate that SP3-07 stored at -70 degrees C has the long-term stability required for a reference material. We assigned an accuracy-based apo B value of 1.22 g/L to SP3-07, using a nephelometric method that was calibrated with freshly isolated low-density lipoprotein for which the apo B mass value was determined by a standardized sodium dodecyl sulfate-Lowry procedure. Using a common protocol, the study participants transferred the assigned mass value from SP3-07 to the individual calibrators of the analytical systems and measured the ape B concentration of 20 fresh-frozen samples obtained from individual donors and covering a clinically relevant range of apo B values. The among-laboratory CV on these samples, analyzed by 25 analytical systems, ranged from 3.1% to 6.7%. These results demonstrate the lack of matrix effects of SP3-07 and its ability to provide accurate and comparable apo B values in a variety of immunochemical methods. On the basis of the outcome of these studies, the World Health Organization has endorsed SP3-07 as the International Reference Material for Apolipoprotein B.