MACHINING AND MATERIAL FLOW SYSTEM-DESIGN FOR MINIMUM COST PRODUCTION

被引：12

作者：

EGBELU, PJ

机构：

[1] Department of Industrial and Management Systems Engineering, Pennsylvania State University, University Park, PA

来源：

INTERNATIONAL JOURNAL OF PRODUCTION RESEARCH | 1990年 / 28卷 / 02期

关键词：

D O I：

10.1080/00207549008942716

中图分类号：

T [工业技术];

学科分类号：

08 ;

摘要：

In many manufacturing organizations, batch production is an everyday occurrence. Usually, the batch size may range from less than ten parts to thousands. The majority of batch manufacturing in the US is in batches of 100 parts or less. Unless adequate control is exercised, potential sources of operational improvements on batch manufacturing systems can be easily overlooked. Two main time consuming activities encountered in batch manufacturing are operations at the workstation level and material handling. Parts can be handled individually or in small lots. In this paper, a methodology for selecting the machining parameters at each workstation and the material flow plan in a multi-stage production system is presented. The model objective is to minimize total production cost. A forward dynamic programming algorithm imbedded within a unidimensional search algorithm is used in seeking a solution to the model. The procedure can be easily computerized for use as a regular shop planning system. © 1990 Taylor & Francis Group, LLC.

引用

页码：353 / 368

页数：16

共 34 条

[1]

Apple J.M., Material Handling Systems Design, (1972)

[2]

Armarego E.A., Brown E.A., The Machining of Metals, (1964)

[3]

Beightler C.S., Phillips D.T., Wilde D.J., Foundations of Optimization, (1979)

[4]

Boothroyd G., Fundamentals of Metal Machining and Machine Tools, (1975)

[5]

Boothroyd G., Rusek P., Maximum rate of profit criterion in Machining. Journal of Engineering for Industry, Transactions of ASMS, 98, pp. 217-220, (1976)

[6]

Cooper L., Cooper M.W., Introduction to Dynamic Programming, (1981)

[7]

Davis R.P., Wysk R.A., Agee M.H., Characteristics of machine parameter optimization models, Applied Mathematical Modelling, 2, pp. 275-279, (1978)

[8]

Drahici G., Paltinea C., Calculation by convex mathematical programming of the optimal cutting condition when cylindrical milling, Machine Tool Design Research, 14, pp. 143-160, (1974)

[9]

Dreyfus S.E., Law A.M., The Art and Theory of Dynamic Programming, (1977)

[10]

Egrelu P.J., Unit load design for minimum cost manufacture in an automated guided vehicle-based transport system, Proceedings, SME ULTRATECH Conference, 1, pp. 3.19-3.37, (1986)

← 1 2 3 4 →