Influence of Planer Shavings and Waste Particleboards Usage in Core layer on Physical and Mechanical Properties of Three-layer Particleboards

被引：0
|
作者：
Yel, Husnu [1 ]
Donmez Cavdar, Ayfer [2 ]
Kalaycioglu, Hulya [3 ]
Aras, Ugur
机构：
[1] Artvin Coruh Univ, Dept Forest Ind Engn, TR-08000 Artvin, Turkey
[2] Karadeniz Tech Univ, Dept Interior Architecture, TR-61080 Trabzon, Turkey
[3] Karadeniz Tech Univ, Dept Forest Ind Engn, Trabzon, Turkey
来源：
KASTAMONU UNIVERSITY JOURNAL OF FORESTRY FACULTY | 2014年 / 14卷 / 02期
关键词：
Particleboard; Waste particleboard; Planer shavings; Mechanical properties; Physical properties;
D O I：
暂无
中图分类号：
S7 [林业];
学科分类号：
0829 ; 0907 ;
摘要：
The objective of this study is to investigate utilization of waste particleboards and planer shavings in manufacturing three-layer particleboard panels. For this purpose, waste particleboards and planer shavings were used in core layer of particleboard at different shelling ratios. Nine groups of three-layer experimental boards with a target density of 0.65 g/cm(3) were manufactured. Physical (thickness swelling and water absorption) and mechanical properties (modulus of rupture, modulus of elasticity and internal bonding strength) of the particleboards produced were determined according to EN standards. The results have showed the mechanical properties of all the particleboards (excepted for B board group produced from 100% waste particleboard) produced have satisfied the minimum requirements of mechanical properties of particleboard defined in EN standards. Thickness swelling values of the experimental particleboard for 24h water immersion were found lower than the maximum thickness swelling value of particleboard in defined in EN standards.
引用
收藏
页码：215 / 221
页数：7
相关论文
共 50 条
  • [41] Investigation on Interface Morphology and Mechanical Properties of Three-Layer Laser Impact Welding of Cu/Al/Cu
    Huixia Liu
    Hao Jin
    Meng Shao
    Heng Tang
    Xiao Wang
    Metallurgical and Materials Transactions A, 2019, 50 : 1273 - 1282
  • [42] Structure and Mechanical Properties of a Three-Layer Steel/Vanadium Alloy/Steel Material After Radial Forging
    Nikulin, S. A.
    Nechaikina, T. A.
    Rozhnov, A. B.
    Rogachev, S. O.
    Turilina, V. Yu.
    METAL SCIENCE AND HEAT TREATMENT, 2018, 60 (3-4) : 229 - 235
  • [43] Structure and Mechanical Properties of a Three-Layer Steel/Vanadium Alloy/Steel Material After Radial Forging
    S. A. Nikulin
    T. A. Nechaikina
    A. B. Rozhnov
    S. O. Rogachev
    V. Yu. Turilina
    Metal Science and Heat Treatment, 2018, 60 : 229 - 235
  • [44] Experimental investigation of the mechanical properties of clinched joints in three-layer aluminium/SPCC steel/aluminium sheets
    Liu, Fulong
    Guo, Honglin
    Chen, Wei
    Zhang, Xiaotao
    He, Xiaocong
    MATERIALS TODAY COMMUNICATIONS, 2025, 43
  • [45] Structure and Mechanical Properties of the Three-Layer Material Based on a Vanadium Alloy and Corrosion-Resistant Steel
    Nikulin, S. A.
    Rozhnov, A. B.
    Nechaikina, T. A.
    Rogachev, S. O.
    Zavodchikov, S. Yu.
    Khatkevich, V. M.
    RUSSIAN METALLURGY, 2014, Izdatel'stvo Nauka (10): : 793 - 799
  • [46] Investigation on Interface Morphology and Mechanical Properties of Three-Layer Laser Impact Welding of Cu/Al/Cu
    Liu, Huixia
    Jin, Hao
    Shao, Meng
    Tang, Heng
    Wang, Xiao
    METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, 2019, 50A (03): : 1273 - 1282
  • [47] The study on physical and mechanical properties of composite board, using byproduct of plywood for core layer
    Choe, Song-Kyu
    Pi, Duck Won
    Kang, Seog Goo
    Kang, S.G. (lachesis@cnu.ac.kr), 1600, Korean Society of Wood Science Technology (41): : 490 - 496
  • [48] Influence of the Effective Layer Thickness with Dy and Temperature of Heat Treatment on the Structuralphase State and Magnetoresistive Properties of Ni/Dy/Co Three-layer Films
    Shabelnyk, T. M.
    Vorobiov, S. I.
    Kondrakhova, D. M.
    Demydenko, M. H.
    Shpetnyi, I. O.
    Chornous, A. M.
    Demydenko, M. H.
    PROCEEDINGS OF THE 2017 IEEE 7TH INTERNATIONAL CONFERENCE NANOMATERIALS: APPLICATION & PROPERTIES (NAP), 2017,
  • [49] Mechanical properties of three-layer titanium-steel intermetallic-compound composite material at elevated temperatures
    Shmorgun, V.G.
    Slautin, O.V.
    Trykov, Yu.P.
    Izvestiya Ferrous Metallurgy, 2004, (08): : 63 - 64
  • [50] Weldability and mechanical properties of similar and dissimilar resistance spot welds of three-layer advanced high strength steels
    Wei, S. T.
    Liu, R. D.
    Lv, D.
    Lin, L.
    Xu, R. J.
    Guo, J. Y.
    Wang, K. Q.
    Lu, X. F.
    SCIENCE AND TECHNOLOGY OF WELDING AND JOINING, 2015, 20 (01) : 20 - 26
12345