COVER CRACKING AS A FUNCTION OF REBAR CORROSION .2. NUMERICAL-MODEL

被引：360

作者：

MOLINA, FJ ^{[1
]}

ALONSO, C ^{[1
]}

ANDRADE, C ^{[1
]}

机构：

[1] INST CIENCIAS CONSTRUCC EDUARDO TORROJA,SERRANO GALVACHE S-N,E-28033 MADRID,SPAIN

来源：

MATERIALS AND STRUCTURES | 1993年 / 26卷 / 163期

关键词：

D O I：

10.1007/BF02472864

中图分类号：

TU [建筑科学];

学科分类号：

0813 ;

摘要：

A numerical model based on standard finite-element techniques is proposed for the simulation of cracking in concrete specimens when subjected to corrosion of their reinforcement. A smeared-crack approach is used to model the behaviour of the concrete finite elements, while the corrosion, which is understood as the applied load on the structure, is modelled by a combination of initial strains and change of elastic properties, which are respectively equivalent to the expansion and softening of the steel elements at the rebar surface when they rust. The model is applied to four examples, which were simultaneously tested experimentally and reported in Part 1 of this paper, and the influence of the main parameters of the model in the response is studied separately. In particular, the effect on the crack-width rate of the specific volume of the rust being formed is quantitatively assessed.

引用

页码：532 / 548

页数：17

共 11 条

[1] ALLAN ML, 1991, CORROSION 91
[2] COVER CRACKING AS A FUNCTION OF BAR CORROSION .1. EXPERIMENTAL TEST
ANDRADE, C
ALONSO, C
MOLINA, FJ
[J]. MATERIALS AND STRUCTURES, 1993, 26 (162): : 453 - 464
[3] Hillerborg A., 1976, CEMENT CONCRETE RES, V6, P773, DOI DOI 10.1016/0008-8846(76)90007-7
[4] MCLEISH A, 1986, 1632 TAYW ENG RES LA
[5] MOLINA FJ, 1990, ICCET HORMIGON ACERO, V175, P127
[6] TENSILE TESTS AND FAILURE ANALYSIS OF CONCRETE
REINHARDT, HW
CORNELISSEN, HAW
HORDIJK, DA
[J]. JOURNAL OF STRUCTURAL ENGINEERING-ASCE, 1986, 112 (11): : 2462 - 2477
[7] Rots J., 1988, COMPUTATIONAL MODELI
[8] Rots J.G., 1989, HERON, V34, P1989
[9] Rots JG, 1985, HERON, V30, P1
[10] Sygula S., 1984, P ACI RILEM S LONG T, P182

← 1 2 →