ANALYTICAL OPTIMIZATION DESIGN OF RADIAL AND MIXED FLOW TURBINES

被引：22

作者：

CHEN, H

BAINES, NC

机构：

[1] Department of Mechanical Engineering, Imperial College of Science, Technology and Medicine, London

来源：

PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART A-JOURNAL OF POWER AND ENERGY | 1992年 / 206卷 / 03期

关键词：

Aerodynamic loads - Aerodynamics - Energy dissipation - Flow of fluids - Mathematical models - Optimization - Radial flow - Rotors - Turbomachine blades - Velocity control;

D O I：

10.1243/PIME_PROC_1992_206_028_02

中图分类号：

O414.1 [热力学];

学科分类号：

摘要：

The optimization of radial and mixed flow turbine design, based on simple one-dimensional aerodynamic principles, is described. The objective is to minimize energy losses by reducing the inlet and exit velocities of the rotor. The procedure is based on the specification of a loading coefficient. Previous work has shown that turbines of this type have loading coefficients that lie in a narrow band, and so suitable values can be readily determined. A more detailed specification of losses is unnecessary for the optimization. Optimizations are described for zero and non-zero inlet blade angles, and zero, positive and negative exit swirl conditions.

引用

页码：177 / 187

页数：11

共 9 条

[1]

Abidat M., Chen H., Baines N.C., Firth M.R., Design of a highly loaded mixed flow turbine, Proc. Instn Mech. Engrs, Part A, 206, A2, pp. 95-107, (1992)

[2]

Rohlik H.E., Analytical determination of radial inflow turbine design geometry for maximum efficiency, (1968)

[3]

Wasserbauer C.A., Glassman A.J., Fortran program for predicting off-design performance of radial-inflow turbines, (1975)

[4]

Rodgers C., Small high pressure ratio radial turbine technology, (1987)

[5]

Whitfield A., Baines N.C., Design of radial twbomachines, (1990)

[6]

Whitfield A., The preliminary design of radial inflow turbines, Trans. ASME, 112, pp. 50-57, (1990)

[7]

Schobeiri T., Dunn M., A simple predictive method for optimum thermo-fluid dynamic design of radial gas turbines, Fluid machinery components, 101, pp. 45-53, (1990)

[8]

Chen H., Abidat M., Baines N.C., Firth M.R., The effects of blade loading in radial and mixed flow turbines, (1992)

[9]

Chen H., Abidat M., Baines N.C., Firth M.R., Exit traverse study of mixed flow turbines with inlet incidence variation

← 1 →