IMPACT WAVE-PROPAGATION IN A THICK COMPOSITE PLATE USING DYNAMIC MOIRE INTERFEROMETRY

被引:9
作者
EPSTEIN, JS
DEASON, VA
ABDALLAH, MG
机构
[1] IDAHO NATL ENGN LAB,APPL OPT GRP,IDAHO FALLS,ID 83415
[2] HERCULES ADV MAT & SYST CO,ADV COMPOSITES TECHNOL,MAGNA,UT 84044
关键词
D O I
10.1016/0143-8166(92)90025-3
中图分类号
O43 [光学];
学科分类号
070207 ; 0803 ;
摘要
Dynamic moire interferometry is employed to study the localized impact response of a thick composite plate. The plate, 15 mm thick by 50 mm wide by 152 mm in length, consists of 0/90/0(3) graphite fibers in a Hercules AS4/3501-6 carbon/graphite pre-preg. The plate is impacted under three-point bending. 1200 l/mm gratings are replicated on the free plate edge directly under the impact site; a multiplication of two is used to obtain an in-plane displacement sensitivity of 0.4 mm. Displacements are interrogated approximately every 10-mu-s perpendicular to the 0-degrees fiber direction. Initial results outline the localized displacement directly under the impact tup as a function of time. These displacements facilitate an understanding of the resistance of thick composite plates to damage from sharp impact.
引用
收藏
页码:35 / 46
页数:12
相关论文
共 8 条
[1]   DYNAMIC DIFFRACTION MOIRE - THEORY AND APPLICATIONS [J].
DEASON, VA ;
EPSTEIN, JS ;
ABDALLAH, M .
OPTICS AND LASERS IN ENGINEERING, 1990, 12 (2-3) :173-187
[2]  
DEASON VA, 1987, SPIE, V7465, P1520
[3]  
DEASON VA, IN PRESS OPTICS LASE
[4]  
FALLSTROM KE, 1989, EXP MECH, V1, P409
[5]  
Post D., 1987, HDB EXPT MECHANICS
[6]  
RILEY WF, 1962, J APPLIED MECH, V2, P23
[7]  
ROWLANDS RE, 1974, EXP MECH, V3, P433
[8]  
1988, SACMA SRM288 SUPPL A