DESCRIPTION OF CREEP RUPTURE STRENGTH OF TENSILE ROD WITH RECTANGULAR AND CIRCULAR CROSS-SECTION AT HIGH TEMPERATURE AIR MEDIA

被引:11
作者
Fomin, L. V. [1 ]
机构
[1] Moscow MV Lomonosov State Univ, Res Inst Mech, 1 Michurinsky Pr, Moscow 119192, Russia
来源
VESTNIK SAMARSKOGO GOSUDARSTVENNOGO TEKHNICHESKOGO UNIVERSITETA-SERIYA-FIZIKO-MATEMATICHESKIYE NAUKI | 2013年 / 03期
关键词
rod; tension; creep rupture strength; air aggressive media; kinetic theory; damage; concentration; rectangular cross-section; circular cross-section;
D O I
10.14498/vsgtu1228
中图分类号
O4 [物理学];
学科分类号
0702 ;
摘要
Description of known experimental data on the creep rupture strength of tensile rectangular and circular cross-sections rods at high temperature in air media is considered. Simulation of the creep rupture strength of tensile specimens is based on the Yu. N. Rabotnov's kinetic theory with two structural parameters - damage and concentration of the chemical elements of the medium in the rod's material. It has been shown on the basis of experimental data that the scale effect and in particular the relative volume fraction of the surface layer of the rod exposed to the aggressive medium influence on the characteristics of creep rupture strength.
引用
收藏
页码:87 / 97
页数:11
相关论文
共 7 条
[1]  
Cane B. J., 1985, FLOW FRACTURE ELEVAT, P279
[2]  
Lokoshchenko A.M., 2007, MODELING CREEP LONG
[3]  
Lokoshchenko A. M., 2000, CREEP LONG TERM STRE
[4]  
Oding I. A., 1959, ZAVODSK LAB, V25, P329
[5]  
Rabotnov Yu.N., 1966, CREEP STRUCTURAL ELE
[6]  
Shesterikov S. A., 1984, IZV AKAD NAUK SSSR S, P96
[7]  
Sorokin V. G., 2001, STEELS AND ALLOYS