The Evaluation of Surface and Adhesive Bonding Properties for Cold Rolled Steel Sheet for Automotive Treated by Ar/O-2 Atmospheric Pressure Plasma

被引：5
|
作者：
Lee, Chan-joo
Lee, Sang-kon
Kim, Byung-min
机构：
来源：
TRANSACTIONS OF THE KOREAN SOCIETY OF MECHANICAL ENGINEERS A | 2008年 / 32卷 / 04期
关键词：
Atmospheric Pressure Plasma; Surface Treatment; Adhesive Bonding Strength; Cold Rolled Steel Sheet;
D O I：
10.3795/KSME-A.2008.32.4.354
中图分类号：
TH [机械、仪表工业];
学科分类号：
0802 ;
摘要：
Cold rolled steel sheet for automotive was treated by Ar/O-2 atmospheric pressure plasma to improve the adhesive bonding strength. Through the contact angle test and calculation of surface free energy for cold rolled steel sheet, the changes of surface properties were investigated before and after plasma treatment. The contact angle was decreased and surface free energy was increased after plasma treatment. And the change of surface roughness and morphology were observed by AFM(Atomic Force Microscope). The surface roughness of steel sheet was slightly changed. Based on Taguchi method, single lap shear test was performed to investigate the effect of experimental parameter such as plasma power, treatment time and flow rate of 02 gas. Results shows that the bonding strength of steel sheet treated in Ar/O-2 atmospheric pressure plasma was improved about 20% compared with untreated sheet.
引用
收藏
页码：354 / 361
页数：8
相关论文
共 38 条
  • [31] Absolute OH density measurements in the effluent of a cold atmospheric-pressure Ar-H2O RF plasma jet in air
    Verreycken, Tiny
    Mensink, Rob
    van der Horst, Ruud
    Sadeghi, Nader
    Bruggeman, Peter J.
    PLASMA SOURCES SCIENCE & TECHNOLOGY, 2013, 22 (05):
  • [32] Absolute OH density measurements in the effluent of a cold atmospheric-pressure Ar-H2O RF plasma jet in air
    Verreycken, Tiny
    Mensink, Rob
    Van Der Horst, Ruud
    Sadeghi, Nader
    Bruggeman, Peter J.
    Plasma Sources Science and Technology, 2013, 22 (05)
  • [33] Time-dependent surface properties and wafer bonding of O2-plasma-treated sillicon (100) surfaces
    Wiegand, M
    Reiche, M
    Gösele, U
    JOURNAL OF THE ELECTROCHEMICAL SOCIETY, 2000, 147 (07) : 2734 - 2740
  • [34] Excitation Frequency-Controlled Cold Atmospheric Pressure Plasma: Effects of N2 Admixture on Ar Discharge Properties and Breast Cancer Cell Death
    Misra, Vandana Chaturvedi
    Bellare, Ganesh Pai
    Tiwari, Nirupama
    Patro, Birija Sankar
    Ghorui, Srikumar
    IEEE TRANSACTIONS ON PLASMA SCIENCE, 2024, 52 (07) : 1 - 10
  • [35] Physicochemical properties and enhanced cellullar responses of biocompatible polymeric scaffolds treated with atmospheric pressure plasma using O2 gas
    Lee, Hyun-Uk
    Park, So-Young
    Kang, Yoon-Hee
    Jeong, Se-Young
    Choi, Sae-Hae
    Jahng, Yoon-Young
    Chung, Gook-Hyun
    Kim, Moon-Bum
    Cho, Chae-Ryong
    MATERIALS SCIENCE & ENGINEERING C-MATERIALS FOR BIOLOGICAL APPLICATIONS, 2011, 31 (03): : 688 - 696
  • [36] Influence of moisture on wettability and sizing properties of raw cotton yarns treated with He/O2 atmospheric pressure plasma jet
    Sun, Shiyuan
    Qiu, Yiping
    SURFACE & COATINGS TECHNOLOGY, 2012, 206 (8-9): : 2281 - 2286
  • [37] Film deposition on the inner surface of tubes using atmospheric-pressure Ar-CH4, Ar-C2H2 and Ar-C2H2-H2 plasmas: interpretation of film properties from plasma-chemical kinetics
    Pothiraja, Ramasamy
    Engelhardt, Max
    Bibinov, Nikita
    Awakowicz, Peter
    JOURNAL OF PHYSICS D-APPLIED PHYSICS, 2012, 45 (33)
  • [38] Nonhomogeneous surface properties of parylene-C film etched by an atmospheric pressure He/O2 micro-plasma jet in ambient air
    Wang, Tao
    Yang, Bin
    Chen, Xiang
    Wang, Xiaolin
    Yang, Chunsheng
    Liu, Jingquan
    APPLIED SURFACE SCIENCE, 2016, 383 : 261 - 267
1234