The Evaluation of Surface and Adhesive Bonding Properties for Cold Rolled Steel Sheet for Automotive Treated by Ar/O-2 Atmospheric Pressure Plasma

被引：5
|
作者：
Lee, Chan-joo
Lee, Sang-kon
Kim, Byung-min
机构：
来源：
TRANSACTIONS OF THE KOREAN SOCIETY OF MECHANICAL ENGINEERS A | 2008年 / 32卷 / 04期
关键词：
Atmospheric Pressure Plasma; Surface Treatment; Adhesive Bonding Strength; Cold Rolled Steel Sheet;
D O I：
10.3795/KSME-A.2008.32.4.354
中图分类号：
TH [机械、仪表工业];
学科分类号：
0802 ;
摘要：
Cold rolled steel sheet for automotive was treated by Ar/O-2 atmospheric pressure plasma to improve the adhesive bonding strength. Through the contact angle test and calculation of surface free energy for cold rolled steel sheet, the changes of surface properties were investigated before and after plasma treatment. The contact angle was decreased and surface free energy was increased after plasma treatment. And the change of surface roughness and morphology were observed by AFM(Atomic Force Microscope). The surface roughness of steel sheet was slightly changed. Based on Taguchi method, single lap shear test was performed to investigate the effect of experimental parameter such as plasma power, treatment time and flow rate of 02 gas. Results shows that the bonding strength of steel sheet treated in Ar/O-2 atmospheric pressure plasma was improved about 20% compared with untreated sheet.
引用
收藏
页码：354 / 361
页数：8
相关论文
共 38 条
  • [1] Evaluation of surface and bonding properties of cold rolled steel sheet pretreated by Ar/O2 atmospheric pressure plasma at room temperature
    Lee, C. J.
    Lee, S. K.
    Ko, D. C.
    Kim, D. J.
    Kim, B. M.
    JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, 2009, 209 (10) : 4769 - 4775
  • [2] Effect of Atmospheric Pressure Flame Plasma Treatment on Surface and Adhesive Bonding Properties between Steel Plate and Rubber
    Ryu, Sang Ryeoul
    Lee, Dong Joo
    COMPOSITES RESEARCH, 2010, 23 (05): : 1 - 7
  • [3] Atmospheric pressure plasma effects on the adhesive bonding properties of stainless steel and epoxy composites
    Williams, Thomas S.
    Yu, Hang
    Yeh, Po-Ching
    Yang, Jenn-Ming
    Hicks, Robert F.
    JOURNAL OF COMPOSITE MATERIALS, 2014, 48 (02) : 219 - 233
  • [4] Influence of the β- Radiation/Cold Atmospheric-Pressure Plasma Surface Modification on the Adhesive Bonding of Polyolefins
    Bednarik, Martin
    Mizera, Ales
    Manas, Miroslav
    Navratil, Milan
    Huba, Jakub
    Achbergerova, Eva
    Stoklasek, Pavel
    MATERIALS, 2021, 14 (01) : 1 - 17
  • [5] Comparison of the surface characteristics of polypropylene films treated by Ar and mixed gas (Ar/O2) atmospheric pressure plasma
    Kwon, OJ
    Myung, SW
    Lee, CS
    Choi, HS
    JOURNAL OF COLLOID AND INTERFACE SCIENCE, 2006, 295 (02) : 409 - 416
  • [6] Atmospheric Pressure Plasma Jet in Ar and O2/Ar Mixtures:Properties and High Performance for Surface Cleaning
    金英
    任春生
    杨亮
    张家良
    王德真
    Plasma Science and Technology, 2013, (12) : 1203 - 1208
  • [7] Atmospheric Pressure Plasma Jet in Ar and O2/Ar Mixtures: Properties and High Performance for Surface Cleaning
    Jin Ying
    Ren Chunsheng
    Yang Liang
    Zhang Jialiang
    Wang Dezhen
    PLASMA SCIENCE & TECHNOLOGY, 2013, 15 (12) : 1203 - 1208
  • [8] Development and evaluation of model for mechanism of formation of surface properties of cold-rolled stainless steel sheet
    Fudanoki, F
    Araki, J
    Inoue, S
    Yanai, K
    TETSU TO HAGANE-JOURNAL OF THE IRON AND STEEL INSTITUTE OF JAPAN, 1997, 83 (08): : 24 - 29
  • [9] Nonequilibrium Atmospheric Pressure Ar/O2 Plasma Jet:Properties and Application to Surface Cleaning
    金英
    任春生
    杨亮
    张家良
    Plasma Science and Technology, 2016, (02) : 168 - 172
  • [10] Nonequilibrium Atmospheric Pressure Ar/O2 Plasma Jet: Properties and Application to Surface Cleaning
    Jin Ying
    Ren Chunsheng
    Yang Liang
    Zhang Jialiang
    PLASMA SCIENCE & TECHNOLOGY, 2016, 18 (02) : 168 - 172
1234