GENERATION OF ENGINEERED SURFACES BY THE SURFACE-SHAPING SYSTEM

被引：30

作者：

HONG, MS

EHMANN, KF

机构：

来源：

INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE | 1995年 / 35卷 / 09期

关键词：

D O I：

10.1016/0890-6955(94)00114-Y

中图分类号：

T [工业技术];

学科分类号：

08 ;

摘要：

Engineering surfaces are generated by a variety of manufacturing processes, each of which produces a surface with its own characteristic topography. A method for the prediction of the topography of engineering surfaces has been developed based on models of machine tool kinematics and cutting tool geometry. The model termed the surface-shaping system accounts for not only the nominal or global cutting motions but also takes into account errors during machining such as tool runout, machine deformation and vibration, as well as higher order motions.

引用

页码：1269 / 1290

页数：22

共 19 条

[1]

Patir, Cheng, An application of average flow model to lubrication between rough sliding surfaces, ASME J. Lubrication Technol., 101, pp. 220-230, (1979)

[2]

Lai, Cheng, Computer simulation of elastic rough contacts, ALSE Trans., 22, pp. 184-189, (1985)

[3]

Babin, Lee, Sutherland, Kapoor, A model for end milled surface topography, Proc. 13th NAMRC, pp. 362-368, (1985)

[4]

Babin, Sutherland, Kapoor, On the geometry of end milled surfaces, Proc. 14th NAMRC, pp. 168-176, (1986)

[5]

You, Ehmann, Synthesis and generation of surfaces milled by ball nose end mills under tertiary cutter motion, ASME J. Engng Ind., 113, pp. 17-24, (1991)

[6]

Hong, Ehmann, Practical implementation of tertiary cutter motions for the improvement of 3-D sculptured surface characteristics in milling, Trans. NAMRI of SME, 18, pp. 222-229, (1990)

[7]

Stout, Sullivan, The analysis of the three dimensional topography of the grinding process, Ann. CIRP, 38, 1, pp. 545-548, (1989)

[8]

Gorjala, Rajurkar, Jain, Computer modeling and graphical simulation of ECM toot design, Trans. NAMRI of SME, 19, pp. 121-127, (1991)

[9]

Tricaico, Delpretti, Dauw, Geometrical simulation of the EDM die-sinking process, CIRP Annals - Manufacturing Technology, 37, 1, pp. 191-196, (1988)

[10]

Hong, Generation, characterization and synthesis of engineering surfaces, Ph.D. thesis, (1994)

← 1 2 →