CRYOGENIC MATERIAL PROPERTIES OF STAINLESS-STEEL TUBE-TO-FLANGE WELDS

被引：1
|
作者：
SIEWERT, TA
MCCOWAN, CN
VIGLIOTTI, DP
机构：
[1] Fracture and Deformation Division, NIST, Boulder
来源：
CRYOGENICS | 1990年 / 30卷 / 04期
关键词：
materials characterization; mechanical properties; steel;
D O I：
10.1016/0011-2275(90)90316-5
中图分类号：
O414.1 [热力学];
学科分类号：
摘要：
The mechanical properties of stainless steel tube-to-flange welds for a cryogenic piping application were measured. A planar specimen was developed to duplicate the constraint, loading and heat-sink properties of the circular joint, while reducing preparation time and cost. Specimens were evaluated containing welds between the tube material (21 Cr-6Ni-9Mn) and the three stainless steels being considered for the flange materials: type 304L, type 316L and 21 Cr-6Ni-9Mn. The mechanical property tests consisted of three phases: simple tensile testing to failure, tensile testing of notched specimens (where the notch simulated fabrication flaws) and fatigue testing of notched specimens for the 4 × 104 cycle design life of the structure. The type 316L stainless steel flange produced welds with the best combination of strength and ductility at 295 and 4 K in all three phases of testing. © 1990.
引用
收藏
页码：356 / 364
页数：9
相关论文
共 50 条
  • [21] Effect of cryogenic rolling and annealing on the microstructure evolution and mechanical properties of 304 stainless steel
    Shi, Jin-tao
    Hou, Long-gang
    Zuo, Jin-rong
    Zhuang, Lin-zhong
    Zhang, Ji-shan
    INTERNATIONAL JOURNAL OF MINERALS METALLURGY AND MATERIALS, 2017, 24 (06) : 638 - 645
  • [22] Microstructure and Mechanical properties of Borated Stainless Steel (304B) GTA and SMA welds
    Kumar, G. R.
    Ram, G. D. J.
    Rao, S. R. K.
    METALLURGIA ITALIANA, 2015, (05): : 47 - 52
  • [23] On the role of molybdenum on the microstructural, mechanical and corrosion properties of the GTAW AISI 316 stainless steel welds
    Ostovan, Farhad
    Shafiei, Ehsan
    Toozandehjani, Meysam
    Mohamed, Intan Fadhlina
    Soltani, Masoud
    JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T, 2021, 13 (13): : 2115 - 2125
  • [24] Structure, properties, and residual stress of 304L stainless steel friction stir welds
    Reynolds, AP
    Tang, W
    Gnaupel-Herold, T
    Prask, H
    SCRIPTA MATERIALIA, 2003, 48 (09) : 1289 - 1294
  • [25] Mechanical properties of ferritic stainless steel welds in using type 409 and 430 filler metals
    Anttila, S.
    Karjalainen, P.
    Lantto, S.
    WELDING IN THE WORLD, 2013, 57 (03) : 335 - 347
  • [26] Effect of weld metal chemistry and heat input on the structure and properties of duplex stainless steel welds
    Muthupandi, V
    Srinivasan, PB
    Seshadri, SK
    Sundaresan, S
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2003, 358 (1-2): : 9 - 16
  • [27] Microstructure and Mechanical Properties of Thermally Treated Cr-Mn-Cu Stainless Steel Welds
    Amuda, M. O. H.
    Lawal, T. F.
    Enumah, K. S.
    Omonua, F. S.
    INTERNATIONAL JOURNAL OF INTEGRATED ENGINEERING, 2020, 12 (04): : 161 - 171
  • [28] Mechanical properties of ferritic stainless steel welds in using type 409 and 430 filler metals
    S. Anttila
    P. Karjalainen
    S. Lantto
    Welding in the World, 2013, 57 : 335 - 347
  • [29] Effect of thickness of transition layer on the microstructure and properties of the titanium/stainless steel welds with oscillating laser
    Li, Yun-long
    Di, Hong-shuang
    Li, Tian-xiang
    Chen, Li-qing
    Wang, Xiao-nan
    Misra, R. D. K.
    JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T, 2022, 18 : 210 - 222
  • [30] Post-fire mechanical properties of stainless-clad bimetallic steel butt welds
    Dai, Peng
    Ban, Huiyong
    Zhang, Linbo
    Yang, Lu
    JOURNAL OF CONSTRUCTIONAL STEEL RESEARCH, 2025, 226
12345