ANALYSIS OF POLAR THERMALLY LABILE PESTICIDES USING DIFFERENT SOLID-PHASE EXTRACTION (SPE) MATERIALS WITH GC AND HPLC TECHNIQUES

In the present study, an efficient method for extraction, separation and determination of a limited number (30) of polar pesticides in aqueous matrices has been developed. Pesticides were extracted with high recoveries (usually >85%) from 1 L water samples, using the solid-phase extraction (SPE) technique. Affinities to different SPE materials (C-18 and XAD resins) have been studied for all pesticides. Special attention has been paid to the following 5 pesticides (which have classified by the EC as compounds which are particularly difficult to analyse): benazolin, bromofenoxim, ethofumesate, fenamiphos and phenmedipham. Thermally labile compounds have been determined with high pressure liquid chromatography (HPLC) and UV detection in comparison to TSP-LC-MS. Absolute limits of detection (LODs) for the HPLC technique are usually below 1 ng at 220 nm. Thermospray LC-MS determination shows usually limits of detection of 1-10 ng (SCAN) and 60-800 pg (SIM). All pesticides, which are amenable to GC have been detected in a comparative study with the following detectors: flame ionization detector (FID), nitrogen-phosphorus detector (NPD), electron capture detector (ECD) and atomic emission detector (AED). Element-specific detection of various functional groups of these pesticides has been achieved using GC-AED. Thus, while the FID has the lowest specificity, the AED is the most specific detector. LODs are usually <300 pg (FID < 20 pg, NPD < 1 pg, ECD < 1 pg, AED < 300 pg). Spiked river water samples (from the River Leine and River Weser in Lower Saxony, Germany) have been used to test the employed method. With the spiked surface water samples recoveries were usually >80%.