A COMPARISON OF VARIOUS FILTER AND DISCRIMINATOR TECHNIQUES ON TIMING WITH GE(LI) DETECTORS

An experimental examination of the effect of several filters and two discriminator techniques on the time measurement of the signals from coaxial Ge(Li) detectors is presented in this paper. The signal to the filters and discriminators was obtained from the output of the charge-sensitive preamplifier in order not to degrade the energy resolution of the system. The discriminators used were a level discriminator for leading-edge discrimination and a fast zero-crossing discriminator. The filters examined for leading-edge discrimination were four RC time-invariant and four RC time-variant filters, and the filters for zero-crossing discrimination were three time-invariant RC filters. A comparison of time-invariant and time-variant filters reveals two advantages of the time-variant filter. These advantages are smaller timing errors and lower discrimination levels. The lower discrimination levels allow the reduction of energy dependent timing errors. Likewise, zero-crossing discrimination provides several improvements over leading-edge discrimination. By a compensation method, timing errors due to charge collection variations are reduced; and, due to the invariancy of the zero-crossing point as a function of amplitude, energy-dependent timing errors are also reduced. Copyright © 1968 by The Institute of Electrical and Electronics Engineers, Inc.