A COMBINED EXPERIMENTAL AND THEORETICAL-STUDY OF FLOW AND PRESSURE DISTRIBUTIONS IN A BRUSH SEAL

A relatively simple theory is presented that can be used to model the flow and pressure distribution in a brush seal matrix. The model assumes laminar, compressible, isothermal flow and requires knowledge of an empirical constant: the seal porosity value. Measurements of the mass flow rate together with radial and axial distributions of pressure were taken on a nonrotating experimental rig. These were obtained using a 122 mm bore brush seal with 0.25 mm radial interference. The experimental data are used to estimate the seal porosity. Measurements of the pressure distributions along the backing ring and under the bristle tips and discussed. Predicted mass flows are compared with those actually measured and there is reasonable agreement considering the limitations of the model.