Effect of Aspect Ratio of Flat Tube on R410A Evaporation Heat Transfer and Pressure Drop

被引:1
作者
Kim, Nae Hyun [1 ]
Lee, Eul Jong [1 ]
Byun, Ho Won [1 ]
机构
[1] Univ Incheon, Dept Mech Syst Engn, Incheon, South Korea
关键词
Evaporation; Heat Transfer; Pressure Drop; Aspect Ratio;
D O I
10.3795/KSME-B.2013.37.4.395
中图分类号
TH [机械、仪表工业];
学科分类号
0802 ;
摘要
In this study, R-410A evaporation heat transfer tests were conducted in flattened tubes made from 5-mm round tubes. The test range covered a saturation temperature of 15 degrees C, heat flux of 5 similar to 15 kW/m(2)K, and mass flux of 200-400 kg/m(2)s. The results showed that both the condensation heat transfer coefficient and the pressure drop increased as the aspect ratio increased, with a pronounced increase for an aspect ratio of 4. A comparison of the flattened tube data with existing correlations revealed that the heat transfer coefficients were reasonably predicted by the Shah correlation, and the pressure drops were reasonably predicted by the Jung and Radermacher correlation.
引用
收藏
页码:395 / 404
页数:10
相关论文
共 26 条
[1]  
[Anonymous], 2010, ANSYS 12
[2]  
Collier J.G., 1994, CONVECTIVE BOILING C, V3rd
[3]  
Cornwell K., 1993, ENERGY EFFICIENCY PR, P624
[4]  
Friedel L, 1979, P EUR 2 PHAS FLOW GR
[5]  
Ghiaansiaan M. S., 2008, 2 PHASE BOILING COND
[6]  
GUNGOR KE, 1987, CHEM ENG RES DES, V65, P148
[7]   PREDICTION OF PRESSURE-DROP DURING HORIZONTAL ANNULAR-FLOW BOILING OF PURE AND MIXED REFRIGERANTS [J].
JUNG, DS ;
RADERMACHER, R .
INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER, 1989, 32 (12) :2435-2446
[8]   A GENERAL CORRELATION FOR SATURATED 2-PHASE FLOW BOILING HEAT-TRANSFER INSIDE HORIZONTAL AND VERTICAL TUBES [J].
KANDLIKAR, SG .
JOURNAL OF HEAT TRANSFER-TRANSACTIONS OF THE ASME, 1990, 112 (01) :219-228
[9]   Heat transfer and pressure drop characteristics during R22 evaporation in an oval microfin tube [J].
Kim, MH ;
Shin, JS ;
Bullard, CW .
JOURNAL OF HEAT TRANSFER-TRANSACTIONS OF THE ASME, 2001, 123 (02) :301-308
[10]   Condensation Heat Transfer and Pressure Drop in Flat Tubes with Different Aspect Ratios [J].
Kim, Nae Hyun ;
Park, Ji Hoon ;
Cha, Sang Jin .
TRANSACTIONS OF THE KOREAN SOCIETY OF MECHANICAL ENGINEERS B, 2010, 34 (12) :1111-1119