Scientific Opinion on the safety evaluation of the following processes based on Starlinger IV+(R) technology used to recycle post-consumer PET into food contact materials" Visy" and "SIA EkoPET"

被引:0
|
作者
Sundh, Ulla Beckman [1 ]
Binderup, Mona-Lise [1 ]
Bolognesi, Claudia [1 ]
Brimer, Leon [1 ]
Castle, Laurence [1 ]
Di Domenico, Alessandro [1 ]
Engel, Karl-Heinz [1 ]
Franz, Roland [1 ]
Gontard, Nathalie [1 ]
Gurtler, Rainer [1 ]
Husoy, Trine [1 ]
Jany, Klaus-Dieter [1 ]
Kolf-Clauw, Martine [1 ]
Leclercq, Catherine [1 ]
Lhuguenot, Jean-Claude [1 ]
Mennes, Wim [1 ]
Milana, Maria Rosaria [1 ]
Pocas, Maria de Fatima Tavares [1 ]
Pratt, Iona [1 ]
Svensson, Kettil [1 ]
Toldra, Fidel [1 ]
Wolfle, Detlef [1 ]
机构
[1] EFSA, Parma, Italy
关键词
Starlinger IV+; Food contact materials; Plastic; Poly(ethylene terephthalate) ( PET); Recycling; Process; Safety evaluation;
D O I
10.2903/j.efsa.2013.3309
中图分类号
TS2 [食品工业];
学科分类号
0832 ;
摘要
This scientific opinion of the EFSA Panel on Food Contact Materials, Enzymes, Flavourings and Processing Aids deals with the safety evaluation of the recycling processes Visy and SIA EkoPET ( EU register numbers RECYC101 and RECYC102 respectively) which are based on the same Starlinger IV+(R) technology. The decontamination efficiency of these processes was demonstrated using the same challenge test. The input of the processes is hot caustic washed and dried PET flakes originating from collected post-consumer PET containers, containing no more than 5 % of PET from non-food consumer applications. Through this technology, washed and dried PET flakes are dried and crystallised in a reactor, then extruded into pellets which are further crystallised in a second reactor. Crystallised pellets are then pre-heated in a third reactor and fed to the Solid State Polymerisation (SSP) reactor. After having examined the challenge test provided, the Panel concluded that the three steps, drying and crystallisation, extrusion and crystallisation and SSP are the critical steps that determine the decontamination efficiency of the processes. The operating parameters to control their performance are the temperature, the gas flow and the residence time for the drying and crystallisation step, the temperature, the pressure and the residence time for extrusion and crystallisation and SSP steps. Under these conditions, it was demonstrated that the recycling processes are able to ensure that the level of migration of potential unknown contaminants into food is below a conservatively modelled migration of 0.1 mu g/kg food. Therefore the Panel concluded the recycled PET obtained from these processes intended to be used up to 100 % for the manufacture of materials and articles for contact with all types of foodstuffs for long term storage at room temperature, with or without hotfill is not considered of safety concern. (C) European Food Safety Authority, 2013
引用
收藏
页数:16
相关论文
共 50 条
  • [1] Scientific Opinion on the safety evaluation of the following processes based on Starlinger IV+ (R) technology used to recycle post-consumer PET into food contact materials "BTB'', "PRT'', "Valplastic'', "Fellinger B" and "BariQ"
    Sundh, Ulla Beckman
    Binderup, Mona-Lise
    Brimer, Leon
    Castle, Laurence
    Engel, Karl-Heinz
    Franz, Roland
    Gontard, Nathalie
    Guertler, Rainer
    Husoy, Trine
    Jany, Klaus-Dieter
    Leclercq, Catherine
    Lhuguenot, Jean-Claude
    Mennes, Wim
    Milana, Maria Rosaria
    Pocas, Fatima
    Pratt, Iona
    Svensson, Kettil
    Toldra, Fidel
    Woelfle, Detlef
    EFSA JOURNAL, 2012, 10 (12)
  • [2] Scientific Opinion on the safety evaluation of the following processes based on Starlinger IV+ (R) technology used to recycle post-consumer PET into food contact materials "Preformia, STF, MPTS, PET to PET and Eco Plastic"
    Sundh, Ulla Beckman
    Binderup, Mona-Lise
    Brimer, Leon
    Castle, Laurence
    Engel, Karl-Heinz
    Franz, Roland
    Gontard, Nathalie
    Gurtler, Rainer
    Husoy, Trine
    Jany, Klaus-Dieter
    Leclercq, Catherine
    Lhuguenot, Jean-Claude
    Mennes, Wim
    Milana, Maria Rosaria
    Pocas, Maria de Fatima
    Toldra, Fidel
    Wolfle, Detlef
    EFSA JOURNAL, 2012, 10 (08)
  • [3] Scientific Opinion on the safety assessment of the process 'San Miguel Industrias PET' based on Starlinger IV+(R) technology used to recycle post-consumer PET into food contact materials
    Bolognesi, Claudia
    Castle, Laurence
    Cravedi, Jean-Pierre
    Engel, Karl-Heinz
    Fowler, Paul
    Franz, Roland
    Grob, Konrad
    Guertler, Rainer
    Husoy, Trine
    Kaerenlampi, Sirpa
    Mennes, Wim
    Milana, Maria Rosaria
    Penninks, Andre
    Silano, Vittorio
    Smith, Andrew
    Pocas, Maria de Fatima Tavares
    Tlustos, Christina
    Toldra, Fidel
    Woelfle, Detlef
    Zorn, Holger
    Zugravu, Corina-Aurelia
    EFSA JOURNAL, 2015, 13 (09)
  • [4] Safety assessment of the process Texplast, based on Starlinger iV+ technology, used to recycle post-consumer PET into food contact materials
    Silano, Vittorio
    Baviera, Jose Manuel Barat
    Bolognesi, Claudia
    Chesson, Andrew
    Cocconcelli, Pier Sandro
    Crebelli, Riccardo
    Gott, David Michael
    Grob, Konrad
    Mortensen, Alicja
    Riviere, Gilles
    Steffensen, Inger-Lise
    Tlustos, Christina
    Van Loveren, Henk
    Vernis, Laurence
    Zorn, Holger
    Dudler, Vincent
    Milana, Maria Rosaria
    Papaspyrides, Constantine
    Pocas, Maria de Fatima Tavares
    Lioupis, Alexandros
    Lampi, Evgenia
    EFSA JOURNAL, 2019, 17 (07)
  • [5] Safety assessment of the process ESTERPET, based on Starlinger iV+ technology, used to recycle post-consumer PET into food contact materials
    Lambre, Claude
    Baviera, Jose Manuel Barat
    Bolognesi, Claudia
    Chesson, Andrew
    Cocconcelli, Pier Sandro
    Crebelli, Riccardo
    Gott, David Michael
    Grob, Konrad
    Mengelers, Marcel
    Mortensen, Alicja
    Riviere, Gilles
    Steffensen, Inger-Lise
    Tlustos, Christina
    Van Loveren, Henk
    Vernis, Laurence
    Zorn, Holger
    Dudler, Vincent
    Milana, Maria Rosaria
    Papaspyrides, Constantine
    Pocas, Maria de Fatima Tavares
    Croera, Cristina
    Lioupis, Alexandros
    Lampi, Evgenia
    EFSA JOURNAL, 2021, 19 (08)
  • [6] Safety assessment of the process Nosoplas, based on Starlinger iV+ technology, used to recycle post-consumer PET into food contact materials
    Lambre, Claude
    Baviera, Jose Manuel Barat
    Bolognesi, Claudia
    Chesson, Andrew
    Cocconcelli, Pier Sandro
    Crebelli, Riccardo
    Gott, David Michael
    Grob, Konrad
    Mengelers, Marcel
    Mortensen, Alicja
    Riviere, Gilles
    Steffensen, Inger-Lise
    Tlustos, Christina
    Van Loveren, Henk
    Vernis, Laurence
    Zorn, Holger
    Dudler, Vincent
    Milana, Maria Rosaria
    Papaspyrides, Constantine
    Pocas, Maria de Fatima Tavares
    Croera, Cristina
    Lioupis, Alexandros
    Lampi, Evgenia
    EFSA JOURNAL, 2021, 19 (08)
  • [7] Safety assessment of the processes 'Sumilon Eco PET SARL' and 'ITD', based on Starlinger IV+(R) technology, used to recycle post-consumer PET into food contact materials
    Bolognesi, Claudia
    Castle, Laurence
    Cravedi, Jean-Pierre
    Engel, Karl-Heinz
    Fowler, Paul
    Franz, Roland
    Grob, Konrad
    Gurtler, Rainer
    Husoy, Trine
    Karenlampi, Sirpa
    Mennes, Wim
    Milana, Maria Rosaria
    Penninks, Andre
    Silano, Vittorio
    Smith, Andrew
    Pocas, Maria de Ftima Tavares
    Tlustos, Christina
    Wolfle, Detlef
    Zorn, Holger
    Zugravu, Corina-Aurelia
    EFSA JOURNAL, 2016, 14 (01)
  • [8] Safety assessment of the process Poly Recycling, based on Starlinger iV+ technology, used to recycle post-consumer PET into food contact materials
    Silano, Vittorio
    Baviera, Jose Manuel Barat
    Bolognesi, Claudia
    Chesson, Andrew
    Cocconcelli, Pier Sandro
    Crebelli, Riccardo
    Gott, David Michael
    Grob, Konrad
    Mortensen, Alicja
    Riviere, Gilles
    Steffensen, Inger-Lise
    Tlustos, Christina
    Van Loveren, Henk
    Vernis, Laurence
    Zorn, Holger
    Dudler, Vincent
    Milana, Maria Rosaria
    Papaspyrides, Constantine
    Pocas, Maria de Fatima Tavares
    Lioupis, Alexandros
    Lampi, Evgenia
    EFSA JOURNAL, 2019, 17 (07)
  • [9] Safety assessment of the process PET STAR RECYCLING, based on Starlinger iV+ technology, used to recycle post-consumer PET into food contact materials
    Lambre, Claude
    Baviera, Jose Manuel Barat
    Bolognesi, Claudia
    Chesson, Andrew
    Cocconcelli, Pier Sandro
    Crebelli, Riccardo
    Gott, David Michael
    Grob, Konrad
    Mengelers, Marcel
    Mortensen, Alicja
    Riviere, Gilles
    Steffensen, Inger-Lise
    Tlustos, Christina
    Van Loveren, Henk
    Vernis, Laurence
    Zorn, Holger
    Dudler, Vincent
    Milana, Maria Rosaria
    Papaspyrides, Constantine
    Pocas, Maria de Fatima Tavares
    Lioupis, Alexandros
    Marano, Remigio
    Lampi, Evgenia
    EFSA JOURNAL, 2021, 19 (08)
  • [10] Safety assessment of the process HIROYUKI INDUSTRIES, based on Starlinger iV+ technology, used to recycle post-consumer PET into food contact materials
    Lambre, Claude
    Baviera, Jose Manuel Barat
    Bolognesi, Claudia
    Chesson, Andrew
    Cocconcelli, Pier Sandro
    Crebelli, Riccardo
    Gott, David Michael
    Grob, Konrad
    Mengelers, Marcel
    Mortensen, Alicja
    Riviere, Gilles
    Steffensen, Inger-Lise
    Tlustos, Christina
    Van Loveren, Henk
    Vernis, Laurence
    Zorn, Holger
    Dudler, Vincent
    Milana, Maria Rosaria
    Papaspyrides, Constantine
    Pocas, Maria de Fatima Tavares
    Lioupis, Alexandros
    Marano, Remigio
    Lampi, Evgenia
    EFSA JOURNAL, 2021, 19 (08)