THE INFLUENCE OF SUB-TEMPERATURE QUENCHING TEMPERATURE ON THE MICROSTRUCTURE AND PROPERTIES OF 60Si2Mn STEEL

被引:0
作者
Li, A. M. [1 ]
Hu, M. J. [1 ]
机构
[1] Henan Polytechn Univ, Sch Mat Sci & Engn, Jiaozuo 454000, Peoples R China
关键词
60Si2Mn steel; Sub-temperature quenching; Tensile strength; Hardness; Microstructure;
D O I
暂无
中图分类号
T [工业技术];
学科分类号
08 ;
摘要
The influence of sub-temperature quenching temperature on the tensile strength, hardness and toughness of 60Si2Mn steel has been studied, and the ferrite content, austenite grain size and martensite morphology of the microstructure of this steel after sub-temperature quenching analyzed. The results show that duplex microstructure of martensite and ferrite has been obtained by sub-temperature quenching of 60Si2Mn steel. The ferrite content decreases when the quenching temperature increases. The strength and hardness of 60Si2Mn steel increase, however, its toughness decreases within the range of 770 similar to 800 degrees C. The maximum strength and hardness can be obtained by quenching at 800 degrees C, but the strength and hardness decrease above 800 degrees C. The small amount of strip ferrite is distributed among martensite lamellar to improve steel toughness. The entire martensite structure can be obtained by quenching at 810 degrees C.
引用
收藏
页码:181 / 185
页数:5
相关论文
共 50 条
[41]   Reheating Austenitizing Temperature of Spring Steel 60Si2MnA for Railway [J].
CUI JuanLIU YazhengPAN HuiGAO LifengSchool of Materials Science and EngineeringUniversity of Science and Technology BeijingBeijingChinaTechnology CenterXingtai Iron and Steel Co LtdXingtai HebeiChinaQuality Control DepartmentXingtai Iron and Steel Co LtdXingtai HebeiChina .
Journal of Iron and Steel Research(International), 2008, (06) :62-67
[42]   Reheating Austenitizing Temperature of Spring Steel 60Si2MnA for Railway [J].
Cui Juan ;
Liu Ya-zheng ;
Pan Hui ;
Gao Li-feng .
JOURNAL OF IRON AND STEEL RESEARCH INTERNATIONAL, 2008, 15 (06) :62-67
[43]   Reheating Austenitizing Temperature of Spring Steel 60Si2MnA for Railway [J].
Juan Cui ;
Ya-zheng Liu ;
Hui Pan ;
Li-feng Gao .
Journal of Iron and Steel Research International, 2008, 15 :62-67
[44]   Effect of Isothermal Temperature on Microstructure and Mechanical Properties of High Al–Low Si TRIP Steel [J].
Yang Zhao ;
Qiangjun Yan ;
Liqing Chen ;
Xiaoyun Yuan .
Acta Metallurgica Sinica (English Letters), 2014, 27 :389-394
[45]   Effect of Isothermal Temperature on Microstructure and Mechanical Properties of High Al–Low Si TRIP Steel [J].
Yang Zhao ;
Qiangjun Yan ;
Liqing Chen ;
Xiaoyun Yuan .
ActaMetallurgicaSinica(EnglishLetters), 2014, 27 (03) :389-394
[46]   Influence of Annealing Temperature on Microstructure and Magnetic Properties of High-Silicon Electrical Steel [J].
Cao-Son Nguyen ;
Anh-Hoa Bui .
PROCEEDINGS OF THE 3RD ANNUAL INTERNATIONAL CONFERENCE ON MATERIAL, MACHINES AND METHODS FOR SUSTAINABLE DEVELOPMENT, VOL 2, MMMS 2022, 2024, :179-185
[47]   Influence of annealing temperature on the microstructure and mechanical properties of MgB2 [J].
Gorur, O. ;
Nursoy, M. ;
Terzioglu, C. ;
Varilci, A. ;
Belenli, I. .
INTERNATIONAL CONFERENCE ON SUPERCONDUCTIVITY AND MAGNETISM (ICSM), 2009, 153
[48]   Influence of austenization temperature on microstructure and mechanical properties of a new ultra-high strength low alloyed steel [J].
Feng, Ya-Ya ;
Xu, Chi ;
Su, Xiang ;
Sun, Yu-Lin ;
Pan, Xi ;
Cao, Yue-De ;
Chen, Guang .
MATERIALS TESTING, 2017, 59 (11-12) :990-996
[49]   Influences of Austenization Temperature and Annealing Time on Duplex Ultrafine Microstructure and Mechanical Properties of Medium Mn Steel [J].
Chang WANG ;
Wenquan CAO ;
Yun HAN ;
Cunyu WANG ;
Chongxiang HUANG ;
Han DONG .
Journal of Iron and Steel Research(International), 2015, 22 (01) :42-47
[50]   Effect of Rolling Temperature on Microstructure and Mechanical Properties of a Nb-Mo Microalloyed Medium Mn Steel [J].
Liu, Shan ;
Li, Wenxia ;
Su, Junhua ;
Wang, Yunpeng ;
Cai, Minghui .
MATERIALS RESEARCH-IBERO-AMERICAN JOURNAL OF MATERIALS, 2019, 22