THE INFLUENCE OF SUB-TEMPERATURE QUENCHING TEMPERATURE ON THE MICROSTRUCTURE AND PROPERTIES OF 60Si2Mn STEEL

被引：0
作者：
Li, A. M. [1 ]
Hu, M. J. [1 ]
机构：
[1] Henan Polytechn Univ, Sch Mat Sci & Engn, Jiaozuo 454000, Peoples R China
来源：
ENGINEERING REVIEW | 2012年 / 32卷 / 03期
关键词：
60Si2Mn steel; Sub-temperature quenching; Tensile strength; Hardness; Microstructure;
D O I：
暂无
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
The influence of sub-temperature quenching temperature on the tensile strength, hardness and toughness of 60Si2Mn steel has been studied, and the ferrite content, austenite grain size and martensite morphology of the microstructure of this steel after sub-temperature quenching analyzed. The results show that duplex microstructure of martensite and ferrite has been obtained by sub-temperature quenching of 60Si2Mn steel. The ferrite content decreases when the quenching temperature increases. The strength and hardness of 60Si2Mn steel increase, however, its toughness decreases within the range of 770 similar to 800 degrees C. The maximum strength and hardness can be obtained by quenching at 800 degrees C, but the strength and hardness decrease above 800 degrees C. The small amount of strip ferrite is distributed among martensite lamellar to improve steel toughness. The entire martensite structure can be obtained by quenching at 810 degrees C.
引用
收藏
页码：181 / 185
页数：5
相关论文
共 50 条
[31]   Influence of Rolling Temperature and Cooling Rate on Microstructure and Properties of Pipeline Steel Grades [J].
Olalla, V. Carretero ;
Petrov, R. H. ;
Thibaux, P. ;
Liebeherr, M. ;
Gurla, P. ;
Kestens, L. A. I. .
THERMEC 2011, PTS 1-4, 2012, 706-709 :2710-+
[32]   Influence of Annealing temperature on Microstructure and Properties of The Hot-Stamping Boron Steel [J].
Hu, Kuanhui ;
Liu, Xiangdong ;
Tian, Dexin ;
Feng, Guanwen ;
Sun, Fangyi .
PROGRESS IN MATERIALS AND PROCESSES, PTS 1-3, 2013, 602-604 :385-389
[33]   Optimized Properties of a Quenching and Partitioning Steel by Quenching at Fine Martensite Start Temperature [J].
Liu, Man ;
Wang, Jun ;
Zhang, Qi ;
Hu, Haijiang ;
Xu, Guang .
METALS AND MATERIALS INTERNATIONAL, 2021, 27 (08) :2473-2480
[34]   Effect of Intercritical Austenitizing Temperature during Quenching-Intercritical Quenching-Tempering Process on Toughness of 25Mn2Si2Cr Bainitic Steel [J].
Li, Ji ;
Tan, Zhunli ;
Zhang, Min ;
Gao, Guhui ;
Misra, Raja Devesh Kumar ;
Bai, Bingzhe .
STEEL RESEARCH INTERNATIONAL, 2019, 90 (06)
[35]   Effects of soaking and tempering temperature on microstructure and mechanical properties of 65Si2MnWE spring steel [J].
Xu, Le ;
Chen, Liang ;
Sun, Weiyan .
VACUUM, 2018, 154 :322-332
[36]   EFFECT OF TEMPERING TEMPERATURE ON MICROSTRUCTURE AND PROPERTIES OF 65Mn STEEL FOR METALLURGICAL SAW BLADE [J].
Sui, S. Y. ;
Wang, Y. ;
Chen, J. F. .
METALURGIJA, 2024, 63 (01) :97-100
[37]   Effects of the austenitizing temperature on the microstructure and mechanical properties in multiple-phase medium Mn steel [J].
Yang, Yonggang ;
Mi, Zhenli ;
Jiang, Haitao ;
Wang, Mai ;
Xiu, Qi ;
Zhang, Yun ;
Tian, Shiwei ;
Zhang, Guihua .
MATERIALS RESEARCH EXPRESS, 2019, 6 (12)
[38]   Effect of Quenching Temperature on Microstructure and Properties of Cu-bearing 5Cr15MoV Martensitic Stainless Steel [J].
Hao X. ;
Xi T. ;
Zhang H. ;
Yang C. ;
Yang K. .
Cailiao Yanjiu Xuebao/Chinese Journal of Materials Research, 2021, 35 (12) :933-941
[39]   Effect of Si and Mn on Microstructure and Tensile Properties of Austenitic Stainless Steel [J].
Lu Chengxu ;
Yi Haoyu ;
Liang Tian ;
Wang Min ;
Xue Hailong ;
Ma Yingche ;
Liu Kui .
RARE METAL MATERIALS AND ENGINEERING, 2021, 50 (01) :187-194
[40]   The influence of temperature on the microstructure and mechanical properties of sputtered Cr2Nx coatings [J].
Kringhoj, P ;
Bottiger, J ;
Chevallier, J ;
Bienk, EJ ;
Rätzke, K .
SURFACE & COATINGS TECHNOLOGY, 2002, 149 (01) :82-88
12345