THE STRENGTH OF BONDED CARBON-FIBER COMPOSITE JOINTS EXPOSED TO HIGH HUMIDITY

被引：63

作者：

PARKER, BM

机构：

来源：

INTERNATIONAL JOURNAL OF ADHESION AND ADHESIVES | 1990年 / 10卷 / 03期

关键词：

carbon fibre reinforced composites; humidity; joint strength;

D O I：

10.1016/0143-7496(90)90102-4

中图分类号：

TQ [化学工业];

学科分类号：

0817 ;

摘要：

Carbon fibre reinforced epoxy composite joints bonded with epoxy adhesives were exposed to 50°C/96% RH for up to 3 years. Strength reductions were measured which depended on both exposure time and test temperature. Adhesives cured at 175°C gave better retention than those cured at 120°C. Strength changes were dependent on changes in the adhesives rather than in the composite adherends. There was no evidence of disbonds between adhesive and composite developing as a result to exposure: after failure of the adhesive through the fillet, the crack propagated in the adhesive, or in the composite, or both, depending on the adhesive. © 1990.

引用

页码：187 / 191

页数：5

共 19 条

[1]

Knight, Rosenzweig, S-3A composite spoilers service experience, 12th National SAMPE Technical Conference, pp. 186-197, (1980)

[2]

Stone, Composite flight service experience at Lockheed-California, 15th National SAMPE Conference, pp. 277-287, (1983)

[3]

Ellis, Mason, The in-service flight testing of some fibre-reinforced plastic components, Composites, 14, 3, pp. 233-243, (1983)

[4]

Kam, Gaudulis, Flight service of composite structures on McDonnel Douglas commercial airplanes, 15th National SAMPE Technical Conference, pp. 251-262, (1983)

[5]

Coggeshall, Composite material service experience on Boeing commercial airplanes, Proc. 27th Structs, Struct Dynam and Mater Conf, pp. 366-369, (1986)

[6]

Koetsier, Assembly bonding with RT-curing adhesives for better aircraft structures, Materials and Processes, Proc. 5th Tech Conf, (1984)

[7]

Parker, Adhesive bonding of carbon fibre reinforced plastics. Part 1. Effect of high humidity on joint strength, RAE Technical Report 77019, (1977)

[8]

Parker, The effect of extended exposure to hot-humid conditions and subsequent drying on adhesive-bonded CFRP-CFRP joints, RAE Technical Report 82029, (1982)

[9]

Parker, The bondability of carbon fibre composites, Bonding and repair of composites seminar, (1989)

[10]

Parker, The effect of composite prebond moisture on adhesive-bonded CFRP-CFRP joints, Composites, 14, 3, pp. 226-232, (1983)

← 1 2 →