HYDROTREATMENT OF ATHABASCA BITUMEN-DERIVED GAS OIL OVER NI-MO, NI-W, AND CO-MO CATALYSTS

被引：42

作者：

DIAZREAL, RA ^{[1
]}

MANN, RS ^{[1
]}

SAMBI, IS ^{[1
]}

机构：

[1] UNIV OTTAWA,DEPT CHEM ENGN,OTTAWA K1N 6N5,ONTARIO,CANADA

来源：

INDUSTRIAL & ENGINEERING CHEMISTRY RESEARCH | 1993年 / 32卷 / 07期

关键词：

D O I：

10.1021/ie00019a009

中图分类号：

TQ [化学工业];

学科分类号：

0817 ;

摘要：

The hydrotreatment of Athabasca bitumen derived heavy gas oil containing 4.08% S and 0.49% N was carried out in a trickle bed reactor over Ni-W, Ni-Mo, and Co-Mo catalysts supported on zeolite-alumina-silica at 623-698 K, LHSV of 1-4, gas flow rate of 890 m3H2/m3oil (5000 sef/bbl), and pressure of 6.89 MPa. Analyses for viscosity, density, aniline point, ASTM mid boiling point distillation, C/H ratio, and percentage of N and S in the final product were carried out to characterize the product oil. The amounts of N and S removed indicated the hydrodenitrogenation and hydrodesulfurization activity of the catalysts. Results of zeolite-alumina-silica-supported catalysts are compared to those obtained with commercially available Ni-Mo, Ni-W, and Co-Mo on gamma-alumina. Ni-Mo supported on zeolite-alumina-silica was most active and could remove as much as 99% S and 89% N present in the oil at 698 K. The data for HDN and HDS fitted the pseudo first order model. The kinetic model is described in detail.

引用

页码：1354 / 1358

页数：5