Effect of In on Fe phase morphology and properties of Cu-Fe alloy

被引：0

作者：

Yuan, Dawei ^{[1
]}

Liu, Zhenxia ^{[1
]}

Guo, Chengjun ^{[2
]}

Zeng, Hao ^{[1
,4
]}

Zhang, Jianbo ^{[2
,5
]}

Li, Mingmao ^{[2
]}

Peng, Bingfeng ^{[3
]}

Yang, Bin ^{[2
,5
]}

机构：

[1] JiangXi Univ Sci & Technol, Adv Copper Ind Coll, Yingtan, Peoples R China

[2] Jiangxi Univ Sci & Technol, Fac Mat Met & Chem, Ganzhou, Peoples R China

[3] Jiangxi Baotai Nonferrous Met Grp Co Ltd, Yingtan, Peoples R China

[4] JiangXi Univ Sci & Technol, Adv Copper Ind Coll, Yingtan 335000, Peoples R China

[5] Jiangxi Univ Sci & Technol, Fac Mat Met & Chem, Ganzhou 341000, Peoples R China

来源：

MATERIALS SCIENCE AND TECHNOLOGY | 2023年

关键词：

Cu-Fe-In alloy; solidification behaviour; tensile strength; conductivity;

D O I：

暂无

中图分类号：

T [工业技术];

学科分类号：

08 ;

摘要：

In this paper, Cu-6.2Fe-xIn (x = 0, 0.2, 0.4) alloy was prepared by melting casting and mechanical heat treatment. The Fe phase morphology of Cu-6.2Fe-xIn alloy was observed by SEM, EBSD and TEM. The results show that the addition of In element refines the primary Fe phase and optimises its distribution. After large plastic deformation, the Fe phase was fibrillated and the addition of In refines the Fe fibre and increases its density. The strength of Cu-6.2Fe-0.4In alloy with strain of 7 were 901 MPa, which was 201 MPa higher than that of Cu-6.2Fe alloy. The refining effect of In on the primary Fe phase was the main reason for the significant improvement of the strength of Cu-Fe-In alloy.

引用

页数：10

共 50 条

[1] Effect of In on Fe phase morphology and properties of Cu-Fe alloy
Yuan, Dawei
Liu, Zhenxia
Guo, Chengjun
Zeng, Hao
Zhang, Jianbo
Li, Mingmao
Peng, Bingfeng
Yang, Bin
MATERIALS SCIENCE AND TECHNOLOGY, 2023, 39 (18) : 3278 - 3287
[2] Effects of Fe content on microstructure and properties of Cu-Fe alloy
Wang, Meng
Yang, Qian-ru
Jiang, Yan-bin
Li, Zhou
Xiao, Zhu
Gong, Shen
Wang, Yong-ru
Guo, Chuang-li
Wei, Hai-gen
TRANSACTIONS OF NONFERROUS METALS SOCIETY OF CHINA, 2021, 31 (10) : 3039 - 3049
[3] Effect of W content on the microstructure and properties of Cu-Fe alloy
Song, Boxue
Yu, Tianbiao
Jiang, Xingyu
Xi, Wenchao
Lin, Xiaoli
JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T, 2020, 9 (03): : 6464 - 6474
[4] Effect of Sb on coarsening of Fe particles in a Cu-Fe alloy
Monzen, R
Tada, T
Kita, K
PHILOSOPHICAL MAGAZINE LETTERS, 2003, 83 (07) : 433 - 440
[5] Effect of Ni and Si on microstructure and mechanical properties of Cu-Fe alloy
Yue S.-P.
Jie J.-C.
Qu J.-P.
Li T.-J.
Zhongguo Youse Jinshu Xuebao/Chinese Journal of Nonferrous Metals, 2021, 31 (06): : 1485 - 1493
[6] Effect of Lubricating Phase on Microstructure and Properties of Cu-Fe Friction Materials
Wang, Xiaoyang
Ru, Hongqiang
MATERIALS, 2019, 12 (02):
[7] AGING PROCESS OF CU-FE ALLOY
NAGATA, K
NISHIKAWA, S
JOURNAL OF THE JAPAN INSTITUTE OF METALS, 1980, 44 (01) : 53 - 60
[8] Microstructure and properties of Cu-Fe alloy prepared by spray forming
Huang, Su
Lin, Baosen
Zhang, Zerui
Li, Jianping
2024 3RD INTERNATIONAL CONFERENCE ON MATERIALS ENGINEERING AND APPLIED MECHANICS, ICMEAAE 2024, 2024, 2808
[9] Diffraction analysis of α-Fe precipitates in a polycrystalline Cu-Fe alloy
Dong, Qiyi
Wang, Mingpu
Shen, Leinuo
Jia, Yanlin
Li, Zhou
MATERIALS CHARACTERIZATION, 2015, 105 : 129 - 135
[10] EFFECT OF HIGH PRESSURE ON RESISTIVITY OF A DILUTE CU-FE ALLOY
SUMMERS, GP
LIPHAM, JG
ROBERTS, LD
BULLETIN OF THE AMERICAN PHYSICAL SOCIETY, 1971, 16 (01): : 82 - +

← 1 2 3 4 5 →