Metric Buttress Thread Milling and Turning on CNC Machines

被引：2

作者：

Shchurov, I. A. ^{[1
]}

Nemitova, E., V ^{[1
]}

Shchurova, A., V ^{[1
]}

Ardashev, D., V ^{[1
]}

机构：

[1] South Ural State Univ, Fac Mech Engn, Chelyabinsk 454080, Russia

来源：

INTERNATIONAL JOURNAL OF AUTOMOTIVE AND MECHANICAL ENGINEERING | 2018年 / 15卷 / 02期

关键词：

Thread; metric buttress; planetary milling; thread turning; buttress thread milling-turning cutter; CNC machine;

D O I：

10.15282/ijame.15.2.2018.1.0398

中图分类号：

TH [机械、仪表工业];

学科分类号：

0802 ;

摘要：

Present-day catalogues of tool manufacturers do not contain information on milling cutters for planetary milling of metric buttress threads with nominal pitches on computer numerical control (CNC) machines. This paper presents the results of theoretical and experimental investigation of buttress threads cutting on 3-axis CNC machines. The theoretical investigation is based on the kinematic method of envelope determination. This analytical solution has been verified by the solid modelling method and experiments. It has been proven that standard metric buttress threads with nominal pitches cannot be cut by planetary milling on the 3-axis CNC machines. At the same time, metric buttress threads with small pitches can be produced; such cases are described in this paper. However, thread surface quality after planetary milling is problematic. The technology of initial productive thread milling followed by final thread turning is suggested to obtain metric buttress thread using a new type of milling-turning cutters. The results of this investigation can be useful for industrial plants if buttress thread milling on 3-axis CNC machines is necessary.

引用

页码：5146 / 5160

页数：15

共 26 条

[1]

Abdullah R. A., 2010, RES J APPL SCI ENG T, V2, P614, DOI DOI 10.1016/J.PROTCY.2015.02.019

[2] Investigation of cutting characteristics in side-milling a multi-thread worm shaft on automatic lathe [J].

Ahn, J. H. ;

Kang, D. B. ;

Lee, M. H. ;

Kim, H. Y. ;

Kim, S. H. ;

Cho, K. K. .

CIRP ANNALS-MANUFACTURING TECHNOLOGY, 2006, 55 (01) :63-66

[3]

[Anonymous], 51311985 DIN

[4]

[Anonymous], 2018, THREAD TURN THREAD M

[5]

[Anonymous], B191973 ANSI

[6]

[Anonymous], 1017782 GOST

[7]

[Anonymous], 2018, THREADING KORLOY CAT, P62

[8] Analytical and experimental investigations on thread milling forces in titanium alloy [J].

Araujo, Anna Carla ;

Fromentin, Guillaume ;

Poulachon, Gerard .

INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE, 2013, 67 :28-34

[9] The complementary graphical method used for profiling side mill for generation of helical surface [J].

Baroiu, N. ;

Berbinschi, S. ;

Teodor, V. G. ;

Susac, F. ;

Oancea, N. .

MODTECH INTERNATIONAL CONFERENCE - MODERN TECHNOLOGIES IN INDUSTRIAL ENGINEERING V, 2017, 227

[10] Computerized simulation of thread form grinding process [J].

Chiang, C. J. ;

Fong, Z. H. ;

Tseng, J. T. .

MECHANISM AND MACHINE THEORY, 2009, 44 (04) :685-696

← 1 2 3 →