DRYING CHARACTERISTICS OF THICK LUMBER IN A LABORATORY RADIOFREQUENCY VACUUM DRYER

A series of forty two drying runs of two wood species and two cross-sectional dimensions of wood squares were carried out in a laboratory radio-frequency/vacuum (RF/V) dryer. The experimental temperature, pressure and moisture content levels as functions of space and time are presented. The results showed that western red cedar and western hemlock can be dried to a final moisture content of 15% in about 24 and 32 hours, respectively. The quality of the dried specimens was exceptional. Detailed analysis revealed the absence of internal drying stresses, internal and external checking and surface discoloration. Furthermore, evaluation of moisture content distribution in the longitudinal and transverse direction showed minimum variation compared to conventional kiln drying. The experiments also revealed that RF/V drying rates are directly affected by the level of the electrode plate voltage. Drying rates decreased with time when the voltage remained constant throughout the drying cycle thus resulting in long drying times. That was because of the changing dielectric properties of wood due to moisture content reduction during drying. Raising the voltages with time though, resulted in constant drying rates and shorter drying times.