THE INFLUENCE OF CHEMICAL-COMPOSITION AND PRESTRAIN ON IMPACT TOUGHNESS TRANSITION BEHAVIOR OF 18-PERCENT-MN-18-PERCENT-CR-N AUSTENITIC STEELS

被引：0
|
作者：
ISHIZAKA, J [1 ]
ORITA, K [1 ]
TERAO, K [1 ]
机构：
[1] JAPAN STEEL WORKS LTD,DEPT MAT ENGN,MURORAN 051,JAPAN
来源：
TETSU TO HAGANE-JOURNAL OF THE IRON AND STEEL INSTITUTE OF JAPAN | 1992年 / 78卷 / 12期
关键词：
AUSTENITIC STEEL; LOW TEMPERATURE TOUGHNESS; CLEAVAGE-LIKE FRACTURE; STRENGTH;
D O I：
暂无
中图分类号：
TF [冶金工业];
学科分类号：
0806 ;
摘要：
Transition behaviour of impact absorbed energy is well known for 18%Mn-18%Cr-N steel. The cleavage-like transgranular facets are detected on fracture surface of impact specimens tested at low temperature. Impact absorbed energy decrease when these cleavage-like facets are found on fracture surface of test specimen. The ductile-brittle transition temperature of the materials shifted to lower temperature by increased of nickel content, decrease of nitrogen content or pre-straining at high temperature. The relationship between cleavage-like fracture and plastic deformation stracture at the crack tip of impact test specimen has been investigated.
引用
收藏
页码：1846 / 1853
页数：8
相关论文
共 50 条
  • [21] THE INFLUENCE OF NITROGEN ON THE PASSIVITY OF 18-8 (0.24-PERCENT N) STAINLESS-STEELS
    CLAYTON, CR
    ROSENZWEIG, L
    OVERSLUIZEN, M
    LU, YC
    JOURNAL OF THE ELECTROCHEMICAL SOCIETY, 1986, 133 (08) : C303 - C303
  • [22] Ductile-to-Brittle Transition Behavior of High-Nitrogen 18Cr-10Mn-0.35N Austenitic Steels Containing Ni and Cu
    Hwang, Byoungchul
    Lee, Tae-Ho
    Park, Seong-Jun
    Oh, Chang-Seok
    Kim, Sung-Joon
    PRICM 7, PTS 1-3, 2010, 654-656 : 158 - 161
  • [23] Influence of nitrogen alloying on properties of Fe-18Cr-12Mn-XN austenitic stainless steels
    Behjati, P.
    Kermanpur, A.
    Najafizadeh, A.
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2013, 588 : 43 - 48
  • [24] Hot working behavior of a nitrogen-alloyed Fe-18Mn-18Cr-N austenitic stainless steel
    Moon, Joonoh
    Lee, Tae-Ho
    Shin, Jong-Ho
    Lee, Jong-Wook
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2014, 594 : 302 - 308
  • [25] Effects of deformation-induced martensite and grain size on ductile-to-brittle transition behavior of austenitic 18Cr-10Mn-N stainless steels
    Byoungchul Hwang
    Tae-Ho Lee
    Sung-Joon Kim
    Metals and Materials International, 2010, 16 : 905 - 911
  • [26] Effects of deformation-induced martensite and grain size on ductile-to-brittle transition behavior of austenitic 18Cr-10Mn-N stainless steels
    Hwang, Byoungchul
    Lee, Tae-Ho
    Kim, Sung-Joon
    METALS AND MATERIALS INTERNATIONAL, 2010, 16 (06) : 905 - 911
  • [27] Effect of Nitrogen Content on Precipitation Behavior and Mechanical Properties of Mn18Cr18N Austenitic Stainless Steel
    Qin Fengming
    Li Yajie
    Zhao Xiaodong
    He Wenwu
    Chen Huiqin
    ACTA METALLURGICA SINICA, 2018, 54 (01) : 55 - 64
  • [28] Correlation of austenite stability and ductile-to-brittle transition behavior of high-nitrogen 18Cr-10Mn austenitic steels
    Hwang, Byoungchul
    Lee, Tae-Ho
    Park, Seong-Jun
    Oh, Chang-Seok
    Kim, Sung-Joon
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2011, 528 (24): : 7257 - 7266
  • [29] The influence of cold rolling deformation on tensile properties and microstructures of Mn18Cr18 N austenitic stainless steel
    He, Wenwu
    Li, Fei
    Zhang, Huayu
    Chen, Huiqin
    Guo, Huiguang
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2019, 764
  • [30] Influence of rare earth Ce on hot deformation behavior of as-cast Mn18Cr18N high nitrogen austenitic stainless steel
    Yushuo Li
    Yanwu Dong
    Zhouhua Jiang
    Qingfei Tang
    Shuyang Du
    Zhiwen Hou
    International Journal of Minerals, Metallurgy and Materials, 2023, 30 : 324 - 334
12345