THE BONDING OF COLD-CURED ACRYLIC RESIN TO ACRYLIC DENTURE TEETH

被引：22

作者：

CHUNG, RWC ^{[1
]}

CLARK, RKF ^{[1
]}

DARVELL, BW ^{[1
]}

机构：

[1] UNIV HONG KONG,DEPT PROSTHET DENT,HONG KONG,HONG KONG

来源：

AUSTRALIAN DENTAL JOURNAL | 1995年 / 40卷 / 04期

关键词：

ACRYLIC; BONDING; DENTURE TEETH; TENSILE STRENGTH;

D O I：

10.1111/j.1834-7819.1995.tb04804.x

中图分类号：

R78 [口腔科学];

学科分类号：

1003 ;

摘要：

The necessary improvement of the bonding of denture teeth to the base resin has been hampered by inconsistent results and the consequent lack of clear guidance as to the best procedure to use. This state of affairs is in part due to poor experimental design. The tensile strength of notched planar interfaces between acrylic denture tooth material and cold-cured acrylic resin was determined for various treatments under a protocol designed to minimize spurious failures. The tooth material treatment consisting of grinding and exposure to a methyl methacrylate-trichloromethane mixture was, of those treatments, the most reliable in that no interfacial failures were observed. Strength was indistinguishable from that of both tooth and base acrylic under the same conditions.

引用

页码：241 / 245

页数：5

共 24 条

[1]

Huggett R, John G, Jagger RG, Et al., Strength of the acrylic denture base tooth bond, Br Dent J, 153, pp. 187-190, (1982)

[2]

Spratley MH, An investigation of the adhesion of acrylic resin teeth to dentures, J Prosthet Dent, 58, pp. 389-392, (1987)

[3]

Rupp NW, Bowen RL, Paffenbarger GC, Bonding cold‐curing denture base acrylic resin to acrylic resin teeth, J Am Dent Assoc, 83, pp. 601-606, (1971)

[4]

Trudso H, Budtz-Jorgensen E, Bertram U, A four year follow‐up study on processed pour type resins, J Prosthet Dent, 44, pp. 495-496, (1980)

[5]

Shepard WL, Denture base processed from a fluid resin, J Prosthet Dent, 19, pp. 561-572, (1968)

[6]

Civjan S, Huget EF, de Simon LB, Modifications of the fluid resin technique, J Am Dent Assoc, 85, pp. 109-112, (1972)

[7]

Fletcher AM, Al-Mulla MA, Amin WM, Et al., A method of improving the bonding between artificial teeth and PMMA, J Dent, 13, pp. 102-108, (1985)

[8]

Caswell CW, Norling BK, Comparative study of the bond strengths of three abrasion‐resistant plastic denture teeth bonded to a cross‐linked and a grafted, cross‐linked denture base material, J Prosthet Dent, 55, pp. 701-708, (1986)

[9]

Caul HJ, Stanford JW, Serio AF, Properties of self‐curing denture base resins, The Journal of the American Dental Association, 44, pp. 295-298, (1952)

[10]

Civjan S, Gardner TV, Worthen DF, Et al.

← 1 2 3 →