A THERMODYNAMIC MODEL FOR COMPOSITION AND CHEMICAL DRIVING-FORCE FOR NUCLEATION OF COMPLEX CARBONITRIDES IN MICROALLOYED STEEL

被引：9
作者：
SAMOILOV, A [1 ]
BUCHMAYR, B [1 ]
CERJAK, H [1 ]
机构：
[1] GRAZ TECH UNIV,DEPT MAT & WELDING TECHNOL,A-8010 GRAZ,AUSTRIA
来源：
STEEL RESEARCH | 1994年 / 65卷 / 07期
关键词：
D O I：
10.1002/srin.199401074
中图分类号：
TF [冶金工业];
学科分类号：
0806 ;
摘要：
The extent and degree of dispersion of carbonitrides in high strength low alloy (HSLA) steels is controlled by nucleation and growth processes. A thermodynamic model is presented enabling calculation of the composition of the carbonitride embryo as well as the chemical driving force for nucleation (CDF) in the austenite region of a multicomponent microalloyed steel. The analysis made for a Nb-Ti HSLA steel indicates that the critical carbonitride nucleus is richer in N and Ti than the bulk precipitate at equilibrium at a given temperature and the difference increases when the holding temperature decreases. The results also show that the Ti addition has an optimum value defined by the maximum in the ratio of bound Ti and Nb to their total content. The maximum CDF correlated with the minimum Ti content sufficient to form a carbonitride at the austenitizing temperature.
引用
收藏
页码：298 / 304
页数：7
相关论文
共 50 条
  • [41] A Thermodynamic Study on the Effect of Solute on the Nucleation Driving Force, Solid-Liquid Interfacial Energy, and Grain Refinement of Al Alloys
    Xu, Yijiang
    Zhao, Dongdong
    Li, Yanjun
    METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, 2018, 49A (05): : 1770 - 1781
  • [42] Variation in the Chemical Driving Force for Intragranular Nucleation in the Multi-pass Weld Metal of Ti-Containing High-Strength Low-Alloy Steel
    Kang, Yongjoon
    Han, Kyutae
    Park, Joo Hyun
    Lee, Changhee
    METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, 2015, 46A (08): : 3581 - 3591
  • [43] Variation in the Chemical Driving Force for Intragranular Nucleation in the Multi-pass Weld Metal of Ti-Containing High-Strength Low-Alloy Steel
    Yongjoon Kang
    Kyutae Han
    Joo Hyun Park
    Changhee Lee
    Metallurgical and Materials Transactions A, 2015, 46 : 3581 - 3591
  • [44] Microstructure evolution model for hot strip rolling of Nb-Mo microalloyed complex phase steel
    Sarkar, S.
    Militzer, M.
    MATERIALS SCIENCE AND TECHNOLOGY, 2009, 25 (09) : 1134 - 1146
  • [45] MATHEMATICAL-MODELING, SIMULATIONS, AND ANALYSIS OF THE DYNAMIC PROPERTIES OF THE PHOTOGRAPHIC PROCESS .1. SOLUTIONS OF THE HIERARCHICALLY COUPLED DRIVING-FORCE MODEL (HCD MODEL) BY CLOSED INTEGRATION
    DUNKEL, L
    NUTSCH, E
    CYBERNETICS AND SYSTEMS, 1992, 23 (01) : 105 - 114
  • [46] A Model to Minimize the Hot Rolling Time of a Steel Slab Considering the Steel's Chemical Composition
    Hernandez Carreon, Carlos A.
    Fraire-Huacuja, Hector J.
    Espriella Fernandez, Karla
    Castilla-Valdez, Guadalupe
    Mancilla Tolama, Juana E.
    INTERNATIONAL SYMPOSIUM ON DISTRIBUTED COMPUTING AND ARTIFICIAL INTELLIGENCE 2008, 2009, 50 : 471 - +
  • [47] CHEMICAL AND THERMODYNAMIC PROPERTIES OF BOMBYX MORI - DOMESTIC SILK MOTH Empirical Formula, Driving Force, and Biosynthesis, Catabolism and Metabolism Reactions
    Popovic, Marko E.
    Pavlovic, Marijana R. Pantovic
    Sekularac, Gavrilo M.
    THERMAL SCIENCE, 2023, 27 (6B): : 4893 - 4910
  • [48] Effect of Ce Treatment on the Composition of Nucleation Inclusion in Ti-Mg Complex Deoxidized C-Mn Steel
    Liu, Zhen
    Song, Bo
    Li, Longfei
    Cai, Zeyun
    Cui, Xiaokang
    10TH INTERNATIONAL SYMPOSIUM ON HIGH-TEMPERATURE METALLURGICAL PROCESSING, 2019, : 415 - 425
  • [49] Deformation-induced martensitic transformation in a 201 austenitic steel: The synergy of stacking fault energy and chemical driving force
    Moallemi, M.
    Kermanpur, A.
    Najafizadeh, A.
    Rezaee, A.
    Baghbadorani, H. Samaei
    Nezhadfar, P. Dastranjy
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2016, 653 : 147 - 152
  • [50] A Thermodynamic Model to Estimate the Formation of Complex Nitrides of AlxMg(1–x)N in Silicon Steel
    Yan Luo
    Lifeng Zhang
    Ming Li
    Seetharaman Sridhar
    Metallurgical and Materials Transactions B, 2018, 49 : 894 - 901
12345