STRESS DISTRIBUTIONS ON THE RAKE FACE DURING ORTHOGONAL MACHINING

被引：59
作者：
BURYTA, D
SOWERBY, R
YELLOWLEY, I
机构：
[1] Department of Mechanical Engineering, McMaster University, Ontario L85 4L7, 1280 Main St. W., Hamilton
[2] Department of Mechanical Engineering, University of British Columbia, Vancouver, BC
来源：
INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE | 1994年 / 34卷 / 05期
关键词：
D O I：
10.1016/0890-6955(94)90054-X
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
The authors describe the design, calibration and testing of a split tool dynamometer that has been developed to allow the estimation of rake face stress in a true orthogonal machining process. The device is unique, in that force measurements can be made on the front and rear portions of the cutting tool simultaneously. The normal and shear stress distributions over the rake face of the tool have been calculated based upon cutting tests using AISI C1045 steel, SAE CA360 free cutting brass and AISI 304 stainless steel discs as the work material at a cutting speed of 130 m/min. The experiments also gave insight into the chip sticking length and comparison with scanning electron microscope (SEM) images of the rake face revealed that the dynamometer indeed provides an accurate assessment of the overall chip contact length along the rake face.
引用
收藏
页码：721 / 739
页数：19
相关论文
共 19 条
  • [11] Samanta, Proc. 11th Int. MTDR Conf., (1970)
  • [12] Samanta, J. Mech. Phys. Solids, 19, (1971)
  • [13] Stevenson, Proc. 3rd Conf. Mech. Prop. High Rates of Strain, (1984)
  • [14] Follansbee, Metallurgical Aspects of Shock Wave and High Strain Rate Phenomena, (1986)
  • [15] Follansbee, Regazzoni, Kocks, Proc. 3rd Conf. Mech. Prop. High Rates of Strain, (1984)
  • [16] Follansbee, Kocks, Acta Metall., 36, (1988)
  • [17] Duffy, Proc. 2nd Conf. Mech. Prop. High Rates of Strain, (1979)
  • [18] Kececioglu, Trans. ASME, 80, (1958)
  • [19] Ramalingham, Trigger, J. MTDR, 16, (1976)
12