Finite element analysis of crane secondary truss

被引：6

作者：

Tusnina, O. A. ^{[1
]}

机构：

[1] Natl Res Moscow State Civil Engn Univ, Moscow, Russia

来源：

MAGAZINE OF CIVIL ENGINEERING | 2018年 / 77卷 / 01期

关键词：

crane secondary truss; thin-walled closed profile; restrained torsion; finite element analysis;

D O I：

10.18720/MCE.77.7

中图分类号：

TU [建筑科学];

学科分类号：

0813 ;

摘要：

Finite element analysis of the crane secondary truss of top-blown oxygen vessel plant with the span of 36m is considered in the paper. Analysis of crane secondary truss is quiet difficult because of necessity of taking into account actual stiffness of its joints and also because of the fact that lower belt of truss made of thin-walled closed profile is experiencing restrained torsion because of eccentrically crane load acting. For these reasons modeling of crane secondary truss with the use of beam finite elements not allows to obtain correct results. That is why the shell finite elements should be used to model crane secondary truss. The required finite element mesh is determined in the paper. Participation of the truss into work of entire building skeleton is analyzed and the design scheme of the framework that allowed to obtain reliable results is selected.

引用

页码：68 / 89

页数：22

共 50 条

[31] Finite Element Analysis on Mechanic Behavior of Joints between Elevated Columns and Truss Columns in Substation Frame [J].

Song, Anliang ;

Ran, Hongdong ;

Su, Mingzhou ;

Wang, Zhenshan ;

Shi, Yun .

ADVANCES IN CIVIL ENGINEERING II, PTS 1-4, 2013, 256-259 :949-953

[32] Secondary Developing and Finite Element Analysis on Screw Compressor of Automotive Air Conditioning [J].

Song, Yandong .

MATERIALS SCIENCE AND MECHANICAL ENGINEERING, 2014, 467 :492-495

[33] Double-Girder Overhead Crane Optimum Design Using Weighted Decision Matrix and Finite Element Analysis [J].

Mohamed H.S. ;

Abdelwahab S.A. .

Journal of The Institution of Engineers (India): Series C, 2021, 102 (02) :283-304

[34] Probabilistic finite element analysis of a craniofacial finite element model [J].

Berthaume, Michael A. ;

Dechow, Paul C. ;

Iriarte-Diaz, Jose ;

Ross, Callum F. ;

Strait, David S. ;

Wang, Qian ;

Grosse, Ian R. .

JOURNAL OF THEORETICAL BIOLOGY, 2012, 300 :242-253

[35] Finite element analysis on static performance on combined truss with rectangular steel tube and concrete-filled steel tube [J].

Du, Yawen ;

Lin, Hongyu .

ADVANCED MATERIALS AND PROCESSES, PTS 1-3, 2011, 311-313 :1889-1893

[36] Finite element analysis to enhance the efficiency of the secondary roof of double skin roofs (DSRs) [J].

Ali, M. D. Irfan ;

Asefa, Natnale Sitotaw ;

Gupta, Neeraj Kumar ;

Ekanthaiah, Prathibha ;

Bekele, Natnael ;

Kumar, Rajesh ;

Kumar, Deepak ;

Saxena, Swasti .

MATERIALS TODAY-PROCEEDINGS, 2022, 66 :1651-1657

[37] Finite Element Analysis and Optimization Design of the Base of Prefabricated Cabin for Secondary Combination Devices [J].

Yang, Ning ;

Guo, Shengjun ;

Niu, Yongqiang ;

Wang, Wei .

2017 NINTH INTERNATIONAL CONFERENCE ON INTELLIGENT HUMAN-MACHINE SYSTEMS AND CYBERNETICS (IHMSC 2017), VOL 2, 2017, :51-54

[38] Finite element analysis in situ [J].

Freytag, Michael ;

Shapiro, Vadim ;

Tsukanov, Igor .

FINITE ELEMENTS IN ANALYSIS AND DESIGN, 2011, 47 (09) :957-972

[39] The Finite Element Analysis of a Shaft [J].

Zhang, Guangwei ;

You, Li ;

Li, Zhao .

ADVANCES IN MANUFACTURING SCIENCE AND ENGINEERING, PTS 1-4, 2013, 712-715 :1022-+

[40] What Is Finite Element Analysis? [J].

Welch-Phillips, Adanna ;

Gibbons, Deny ;

Ahern, Daniel P. ;

Butler, Joseph S. .

CLINICAL SPINE SURGERY, 2020, 33 (08) :323-324

← 1 2 3 4 5 →