An Automated Preconcentration Sampler (APS) was developed by the Ontario Ministry of the Environment (MOE) and Carleton University for the determination of polychlorinated dibenzo-p-dioxins (PCDDs) and polychlorinated dibenzofurans (PCDFs) in drinking water. The APS employs a two-stage particulate filtration system followed by an XAD-2 resin column. Field and laboratory testing of the APS is required to validate the device before it is put into regular service. The capacity of the APS filtration system is 30 L for a 4 Formazin Turbidity Unit (FTU) input water turbidity and greater than 50 L for a typical treated water. Flushing of a clean XAD-2 resin column with 200 L of spiked water showed that the optimum flowrate in terms of spike breakthrough is equal to three times the resin bed volume per minute. This flowrate is used for APS operation. Testing also showed that no spike breakthrough occurred after 200 L of clean water was flushed through a spiked XAD-2 resin column at flowrates in excess of the APS operating flowrate. Spike testing was also carried out on the filters and results are pending. An analytical comparison between the present MOE sampling and analytical procedure and the proposed APS sampling and analytical procedure using a PCDD/PCDF source water is planned. © 1990.