THE MICROSTRUCTURE AND PROPERTIES OF HIGH-PRESSURE GAS-ATOMIZED AL-LI-HF ALLOY POWDERS

被引：7
|
作者：
NORMAN, AF
TSAKIROPOULOS, P
机构：
[1] Department of Materials Science and Engineering, University of Surrey, Guildford
来源：
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING | 1991年 / 134卷
关键词：
D O I：
10.1016/0921-5093(91)90942-G
中图分类号：
TB3 [工程材料学];
学科分类号：
0805 ; 080502 ;
摘要：
Powders of the Al-2.2Li-1.23Hf alloy were prepared by high pressure gas atomization and the sub-45-mu-m size fraction was consolidated by extrusion. Continuous and discontinuous precipitation of the alpha' (Al3Li(x)Hf1-x) phase occurred during solution treatment at 450-degrees-C. The delta' phase precipitated during ageing at 190-degrees-C either at the alpha'-matrix interface or as fine delta' particles after prolonged ageing. Peak strength was reached after 1 h at 190-degrees-C. The contributions of the various strengthening mechanisms have been calculated.
引用
收藏
页码：1144 / 1147
页数：4
相关论文
共 50 条
  • [31] Microstructure and Mechanical Properties of Al-Ni-Mm-(Cu, Fe) Alloys Hot-Extruded from Gas-Atomized Powders
    Kim, Hye-Sung
    KOREAN JOURNAL OF MATERIALS RESEARCH, 2006, 16 (02): : 137 - 143
  • [32] Structural and magnetic properties of the gas atomized Mn-Al alloy powders
    Xiaolei Wang
    Junggoo Lee
    Jooho Lee
    Hwijun Kim
    Chuljin Choi
    Zhidong Zhang
    Metals and Materials International, 2012, 18 : 711 - 715
  • [33] Structural and magnetic properties of the gas atomized Mn-Al alloy powders
    Wang, Xiaolei
    Lee, Junggoo
    Lee, Jooho
    Kim, Hwijun
    Choi, Chuljin
    Zhang, Zhidong
    METALS AND MATERIALS INTERNATIONAL, 2012, 18 (04) : 711 - 715
  • [34] Microstructure and martensitic transformation characteristics of gas-atomized Ti-Ni-Cu powders
    Kim, Yeon-wook
    Choi, Kyu-choul
    Chung, Young-soo
    Choi, Eunsoo
    Nam, Tae-hyun
    JOURNAL OF ALLOYS AND COMPOUNDS, 2013, 577 : S227 - S231
  • [35] Phase transformation mechanism and microstructure of a Y-doped TiAl gas-atomized powders
    Gu, Xu
    Yang, Jixin
    Nong, Xiaodong
    Xiong, Xiaojing
    Bi, Yunjie
    Sun, Jianfei
    MATERIALS CHARACTERIZATION, 2024, 218
  • [36] Effect of Particle Size on Microstructure and Cold Compaction of Gas-Atomized Hypereutectic Al-Si Alloy Powder
    Cai, Zhiyong
    Wang, Richu
    Peng, Chaoqun
    Zhang, Chun
    METALLURGICAL AND MATERIALS TRANSACTIONS B-PROCESS METALLURGY AND MATERIALS PROCESSING SCIENCE, 2015, 46 (02): : 824 - 830
  • [37] Effect of Particle Size on Microstructure and Cold Compaction of Gas-Atomized Hypereutectic Al-Si Alloy Powder
    Zhiyong Cai
    Richu Wang
    Chaoqun Peng
    Chun Zhang
    Metallurgical and Materials Transactions B, 2015, 46 : 824 - 830
  • [38] PRESSING OF BLANKS FROM GAS-ATOMIZED HIGH-SPEED STEEL POWDERS
    BAGLYUK, GA
    MAZHAROVA, GE
    KAPLYA, SN
    POZNYAK, LA
    VLASYUK, RZ
    SOVIET POWDER METALLURGY AND METAL CERAMICS, 1990, 29 (07): : 517 - 519
  • [39] Microstructural Evolution of 6061 Aluminum Gas-Atomized Powder and High-Pressure Cold-Sprayed Deposition
    M. R. Rokni
    C. A. Widener
    V. R. Champagne
    Journal of Thermal Spray Technology, 2014, 23 : 514 - 524
  • [40] Microstructural Evolution of 6061 Aluminum Gas-Atomized Powder and High-Pressure Cold-Sprayed Deposition
    Rokni, M. R.
    Widener, C. A.
    Champagne, V. R.
    JOURNAL OF THERMAL SPRAY TECHNOLOGY, 2014, 23 (03) : 514 - 524
12345