Seismic facies analysis makes use of different seismic parameters in order to get other than structural information. A review is given of possibilities and usefulness of seismic facies analysis in oil exploration. A seismic facies unit can be defined as a sedimentary unit which is different from adjacent units in its seismic characteristics. Parameters that should be taken into consideration in the seismic facies analysis are as follows: reflection amplitude, dominant reflection frequency, reflection polarity, interval velocity, reflection continuity, reflection configuration, abundance of reflections, geometry of seismic facies unit, and relationship with other units. Interpretation of seismic facies data may be either direct or indirect. The purpose of the direct interpretation is to find out geological causes responsible for the seismic signature of a seismic facies unit. So, the direct interpretation may be aimed at predicting lithology, fluid content, porosity, relative age, overpressured shales, type of stratification, geometry of the geological body corresponding to the seismic facies unit and its geological setting. The indirect interpretation is intended to reach some conclusions on depositional processes and environments, sediment transport direction, and some aspects of geological evolution (transgression, regression, subsidence, uplift, erosion). The results of the seismic facies analysis may be shown on seismic facies cross‐sections and seismic facies maps. Depending on the available seismic data and geological conditions in the area under consideration, the seismic facies maps may be of different types such as general seismic facies maps showing distribution of different seismic facies units, sand‐shale ratio maps, direction of cross‐bedding and paleo‐transport maps etc. Several kinds of seismic facies units and their geological interpretation are discussed as examples of seismic facies analysis. Copyright © 1978, Wiley Blackwell. All rights reserved
