ATMOSPHERE CONTROL DURING DEBINDING OF POWDER INJECTION-MOLDED PARTS

被引：6
|
作者：
MOORE, JA
JARDING, BP
LOGRASSO, BK
ANDERSON, IE
机构：
[1] Ames Laboratory, Metallurgy and Ceramics Div., Iowa State University, Ames, Iowa
来源：
JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE | 1995年 / 4卷 / 03期
关键词：
DEBINDING; SINTERING; INJECTION MOLDING;
D O I：
10.1007/BF02649064
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
Atmosphere control during debinding of powder injection molded (PIM) parts is an important parameter to consider. Experimental results have shown that a stagnant atmosphere containing volatiles evolved during debinding can cause slumping of the green samples. Removal of volatiles from the sample zone aids debinding and can reduce cycle times and improve sample quality. Residual carbon and oxygen can be controlled during debinding by adjusting the atmosphere composition. This paper presents the results of PIM 70 vol% spherical copper powder and 30 vol% binder. Debinding atmospheres were altered to determine the effect of debinding on the green body and the sintered sample.
引用
收藏
页码：275 / 282
页数：8
相关论文
共 50 条
  • [41] Geometrical accuracy of injection-molded composite gears
    Zajdel, Magdalena
    Pisula, Jadwiga
    Sobolewski, Bartlomiej
    Sanocki, Tadeusz
    Majcherczyk, Henryk
    Budzik, Grzegorz
    Oleksy, Mariusz
    POLIMERY, 2022, 67 (7-8) : 324 - 336
  • [42] Injection molding and debinding of micro gears fabricated by micro powder injection molding
    Ni, Xin-lei
    Yin, Hai-qing
    Liu, Lin
    Yi, Shan-jie
    Qu, Xuan-hui
    INTERNATIONAL JOURNAL OF MINERALS METALLURGY AND MATERIALS, 2013, 20 (01) : 82 - 87
  • [43] Injection molding and debinding of micro gears fabricated by micro powder injection molding
    Xin-lei Ni
    Hai-qing Yin
    Lin Liu
    Shan-jie Yi
    Xuan-hui Qu
    International Journal of Minerals Metallurgy and Materials, 2013, 20 (01) : 82 - 87
  • [44] Injection molding and debinding of micro gears fabricated by micro powder injection molding
    Xin-lei Ni
    Hai-qing Yin
    Lin Liu
    Shan-jie Yi
    Xuan-hui Qu
    International Journal of Minerals, Metallurgy, and Materials, 2013, 20 : 82 - 87
  • [45] Surface Modification and Water Debinding in Zirconia Powder Injection Molding
    Yang Xianfeng
    Xie Zhipeng
    Huang Yong
    RARE METAL MATERIALS AND ENGINEERING, 2009, 38 : 432 - 436
  • [46] The application of fuzzy theory for the control of weld line positions in injection-molded part
    Chen, Mei-Yung
    Tzeng, Huan-Wen
    Chen, Yi-Cheng
    Chen, Shia-Chung
    ISA TRANSACTIONS, 2008, 47 (01) : 119 - 126
  • [47] Enhancement of the mechanical and thermal properties of injection-molded polylactide parts by the addition of acrylated epoxidized soybean oil
    Quiles-Carrillo, L.
    Duart, S.
    Montanes, N.
    Torres-Giner, S.
    Balart, R.
    MATERIALS & DESIGN, 2018, 140 : 54 - 63
  • [48] A QUANTITATIVE COMPARISON OF MORPHOLOGY AND FIBER ORIENTATION IN PUSH-PULL PROCESSED AND CONVENTIONAL INJECTION-MOLDED PARTS
    LUDWIG, HC
    FISCHER, G
    BECKER, H
    COMPOSITES SCIENCE AND TECHNOLOGY, 1995, 53 (02) : 235 - 239
  • [49] HIERARCHICAL STRUCTURAL GRADIENTS IN INJECTION-MOLDED POLY(ETHYLENE NAPHTHALENE-2,6-DICARBOXYLATE) PARTS
    OLCER, Y
    CAKMAK, M
    POLYMER, 1994, 35 (26) : 5651 - 5671
  • [50] Failure and fracture mechanisms of injection-molded plastic products
    Van der Zwet, MJM
    Heidweiller, AJ
    JOURNAL OF APPLIED POLYMER SCIENCE, 1998, 67 (08) : 1473 - 1487
12345