EXPERIMENTAL AND THEORETICAL INVESTIGATIONS ON MORPHOLOGICAL-CHANGES OF GAMMA-' PRECIPITATES IN NI-AL SINGLE-CRYSTALS DURING UNIAXIAL STRESS-ANNEALING

被引:148
作者
MIYAZAKI, T
NAKAMURA, K
MORI, H
机构
[1] Department of Metallurgical Engineering, Nagoya Institute of Technology, Nagoya
关键词
D O I
10.1007/BF00551021
中图分类号
T [工业技术];
学科分类号
08 ;
摘要
Influences of the external tension and compression on the morphological changes of γ′ precipitates during coarsening in an Ni-15 at. % Al single crystal were experimentally investigated, and theoretical evalutions on the energetically favourable shape and its orientation were also derived based upon the anisotropic elasticity theory. The shape transformation with growth in size is experimentally found to follow the sequence: cuboid→rod→ plate, under all annealing conditions, i.e. compression-annealing, tension-annealing and external stress-free annealing. However, the external stresses give preferential orientation to such microstructures. The tension of the [001] direction aligns the rods and plates along the tension axis, while the compression aligns them on a plane perpendicular to the compression axis. Theoretical evaluations based upon the anisotropic elasticity for the energetically favourable shapes and orientations of γ′ are consistent with experimental results except in the appearance of rods after compression-annealing. This discrepancy is understood by a conception that the shape transformation is influenced not only by energetics in the elastic strain and interfacial energies, but also by elastic interaction energy. © 1979 Chapman and Hall Ltd.
引用
收藏
页码:1827 / 1837
页数:11
相关论文
共 27 条
  • [1] AN APPLICATION OF THEORY OF PARTICLE COARSENING - GAMMA' PRECIPITATE IN NI-AL ALLOYS
    ARDELL, AJ
    [J]. ACTA METALLURGICA, 1968, 16 (04): : 511 - &
  • [2] COARSENING OF GAMMA' PRECIPITATES AT LARGE VOLUME FRACTIONS
    CHELLMAN, DJ
    ARDELL, AJ
    [J]. ACTA METALLURGICA, 1974, 22 (05): : 577 - 588
  • [3] MICROSTRUCTURAL BEHAVIOR AND MECHANICAL HARDENING IN A CU-NI-CR ALLOY
    CHOU, A
    DATTA, A
    MEIER, GH
    SOFFA, WA
    [J]. JOURNAL OF MATERIALS SCIENCE, 1978, 13 (03) : 541 - 552
  • [4] COREY CL, 1967, T METALL SOC AIME, V239, P239
  • [5] DAVIES RG, 1965, T METALL SOC AIME, V233, P714
  • [6] THE DETERMINATION OF THE ELASTIC FIELD OF AN ELLIPSOIDAL INCLUSION, AND RELATED PROBLEMS
    ESHELBY, JD
    [J]. PROCEEDINGS OF THE ROYAL SOCIETY OF LONDON SERIES A-MATHEMATICAL AND PHYSICAL SCIENCES, 1957, 241 (1226): : 376 - 396
  • [7] Eshelby JD., 1961, PROG SOLID MECH, P89
  • [8] STRESS-ORIENTED PRECIPITATION OF GP ZONES AND THETA-' IN AN AL-CU ALLOY
    ETO, T
    SATO, A
    MORI, T
    [J]. ACTA METALLURGICA, 1978, 26 (03): : 499 - 508
  • [9] HONTINGTON HB, 1958, SOLID STAT PHYS, V7, P265
  • [10] HORNBOGEN E, 1967, Z METALLKD, V58, P842