Effect of Post-Process Machining on Surface Properties of Additively Manufactured H13 Tool Steel

被引：26

作者：

Breidenstein, B. ^{[1
]}

Brenne, F. ^{[2
]}

Wu, L. ^{[3
]}

Niendorf, T. ^{[2
]}

Denkena, B. ^{[1
]}

机构：

[1] Leibniz Univ Hannover, Inst Fertigungstech & Werkzeugmaschinen, Prod Tech Zentrum Hannover, Univ 2, D-30823 Hannover, Germany

[2] Univ Kassel, Inst Werkstofftech, Fachgebiet Metall Werkstoffe, Kassel, Germany

[3] Addit Mfg Ctr GmbH, Voestalpine, Dusseldorf, Germany

来源：

HTM-JOURNAL OF HEAT TREATMENT AND MATERIALS | 2018年 / 73卷 / 04期

关键词：

Additive manufacturing; selective laser melting; milling; deep rolling; surface and subsurface properties;

D O I：

10.3139/105.110359

中图分类号：

O414.1 [热力学];

学科分类号：

摘要：

The tool steel AISI H13 is characterized by a high wear resistance and a good thermal shock resistance. H13 is mainly employed in applications such as tools for pressure die casting and forging. Processing of H13 by additive manufacturing techniques, such as selective laser melting (SLM), opens up new design possibilities with respect to e.g. internal cooling channels, in order to improve the tool performance during operation. However, due to high surface roughness and insufficient geometric accuracy imposed by SLM, additional cutting or forming processes are often required leading to an alteration of the surface and subsurface properties of the part. The presented work reveals the effect of SLM processing and subsequent face milling and/or deep rolling operations on the development of surface and subsurface properties and highlights adequate process windows.

引用

页码：173 / 186

页数：14

共 31 条

[1]

[Anonymous], 2000, P SOL FREEF FABR S

[2]

Berns H., 2008, EISENWERKSTOFFE STAH, V4th ed.

[3]

Breidenstein B., 2011, OBERFLACHEN RANDZONE

[4]

Brenne F, 2016, PROG ADDIT MANUF DEC, V1, P141, DOI [DOI 10.1007/S40964-016-0013-8, 10.1007/s40964-016-0013-8]

[5] Characterization of microstructure and residual stress in a 3D H13 tool steel component produced by additive manufacturing [J].

Cottam, Ryan ;

Wang, James ;

Luzin, Vladimir .

JOURNAL OF MATERIALS RESEARCH, 2014, 29 (17) :1978-1986

[6] Surface roughness and chip formation in high-speed face milling AISI H13 steel [J].

Cui, Xiaobin ;

Zhao, Jun ;

Jia, Chao ;

Zhou, Yonghui .

INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 2012, 61 (1-4) :1-13

[7] Development of cutting edge geometries for hard milling operations [J].

Denkena, B. ;

Koehler, J. ;

Bergmann, B. .

CIRP JOURNAL OF MANUFACTURING SCIENCE AND TECHNOLOGY, 2015, 8 :43-52

[8] Cutting edge geometries [J].

Denkena, B. ;

Biermann, D. .

CIRP ANNALS-MANUFACTURING TECHNOLOGY, 2014, 63 (02) :631-653

[9]

Denkena B., 2011, TAG 8 IND ERZ HOCHF, P95

[10] A Comparative Investigation on Surface Roughness and Residual Stress during End-Milling AISI H13 Steel with Different Geometrical Inserts [J].

Ding, T. C. ;

Zhang, S. ;

Lv, H. G. ;

Xu, X. L. .

MATERIALS AND MANUFACTURING PROCESSES, 2011, 26 (08) :1085-1093

← 1 2 3 4 →