High peel strength and excellent solder heat-resistance epoxy adhesive for flexible copper clad laminate

被引：0
|
作者：
Li, Anqin [1 ]
He, Hui [1 ,2 ]
Shen, Yue [1 ]
Li, Qunyang [1 ]
机构：
[1] South China Univ Technol, Sch Mat Sci & Engn, Key Lab Guangdong High Property & Funct Polymer Ma, Guangzhou, Peoples R China
[2] South China Univ Technol, Sch Mat Sci & Engn, Key Lab Guangdong High Property & Funct Polymer Ma, 381 Wushan Rd, Guangzhou 510640, Peoples R China
来源：
JOURNAL OF APPLIED POLYMER SCIENCE | 2023年
关键词：
flexible copper clad laminate; high peel strength; modified epoxy resin adhesive; solder heat resistance; toughening modification;
D O I：
暂无
中图分类号：
O63 [高分子化学（高聚物）];
学科分类号：
070305 ; 080501 ; 081704 ;
摘要：
Flexible copper clad laminate (FCCL), commonly composed of copper foil, epoxy adhesive, and polyimide (PI) film, is widely used as the substrate material of flexible printed circuit boards. Carboxyl-terminated acrylonitrile butadiene (CTBN) and four curing agents were used to prepare the modified epoxy adhesive. FCCL's peel strength was improved by treating PI with plasma. The results showed that when the epoxy adhesive was toughened by adding 30 phr CTBN and PI film was treated with nitrogen plasma, the comprehensive performance of the modified epoxy adhesive and FCCL was the best. The impact strength of the modified epoxy adhesive was 39.32 kJ m(-2 )(149.7% higher than that of the unmodified), and the gelation time was 330 s at 160 & DEG;C. The peel strength of FCCL was 1.29 kgf cm(-1), which was higher than required. It can pass the lead-free solder heat-resistance test at 320 & DEG;C 10 s-1 as well. A new way is provided to expand the application of FCCL in areas requiring higher peel strength.
引用
收藏
页数：11
相关论文
共 6 条
  • [1] High peel strength and excellent solder heat-resistance epoxy adhesive for flexible copper clad laminate
    Li, Anqin
    He, Hui
    Shen, Yue
    Li, Qunyang
    JOURNAL OF APPLIED POLYMER SCIENCE, 2023, 140 (43)
  • [2] Effect of laminating parameters on the adhesion property of flexible copper clad laminate with adhesive layer
    Noh, Bo-In
    Yoon, Jeong-Won
    Jung, Seung-Boo
    INTERNATIONAL JOURNAL OF ADHESION AND ADHESIVES, 2010, 30 (01) : 30 - 35
  • [3] Effect of Ni-Cr Layer on Adhesion Strength of Flexible Copper Clad Laminate
    Bo-In Noh
    Seung-Boo Jung
    Journal of Electronic Materials, 2009, 38 : 46 - 53
  • [4] Effect of Ni-Cr Layer on Adhesion Strength of Flexible Copper Clad Laminate
    Noh, Bo-In
    Jung, Seung-Boo
    JOURNAL OF ELECTRONIC MATERIALS, 2009, 38 (01) : 46 - 53
  • [5] Synthesis of Low Loss Nitrogen Heterocyclic Polyimide and Properties of Flexible Copper Clad Laminate Interlayer Adhesive
    Ai R.
    Zhu L.
    Zhang W.
    Zong L.
    Li Z.
    Wang J.
    Jian X.
    Gaofenzi Cailiao Kexue Yu Gongcheng/Polymeric Materials Science and Engineering, 2023, 39 (11): : 1 - 10
  • [6] Preparation of Ultra-thin Adhesive-free Flexible Copper Clad Laminate Based on Energetic Ion Beam Technology
    Zhang Y.-F.
    Yan W.-Q.
    Li Q.
    Yuan H.
    Shen Y.-Q.
    Chen L.
    Pang P.
    Ouyang X.
    Liao B.
    Surface Technology, 2023, 52 (09): : 313 - 321
1