EFFECTS OF AIR INTAKE PRESSURE ON THE ENGINE PERFORMANCE, FUEL ECONOMY AND EXHAUST EMISSIONS OF A SMALL GASOLINE ENGINE

被引:29
作者
Abdullah, Nik Rosli [1 ]
Shahruddin, Nafis Syabil [1 ]
Mamat, Rizalman [2 ]
Mamat, Aman Mohd. Ihsan [1 ]
Zulkifli, Aminuddin [1 ]
机构
[1] Univ Teknol MARA, Fac Mech Engn, Shah Alam 40450, Selangor, Malaysia
[2] Univ Malaysia Pahang, Fac Mech Engn, Pekan 26600, Pahang, Malaysia
关键词
Air intake pressure; air filter; air fuel ratio; fuel consumption; exhaust emissions;
D O I
10.15282/jmes.6.2014.21.0091
中图分类号
TH [机械、仪表工业];
学科分类号
0802 ;
摘要
This study presents the engine performance, fuel economy and exhaust emissions at variations of air intake pressure. In a carburetor system, the air intake pressure is influenced by the degree of opening throttle plate and the Venturi effect which draws the fuel to the combustion chamber. The experimental work was carried out on variations of engine speed and load using a single cylinder four stroke gasoline engine attached to a dynamometer. The measured exhaust emission compositions are used to determine the mode of combustion. The results show that the standard air intake system resulted in rich combustion which then led to incomplete combustion, which was caused by less availability of air for the combustion process. Eliminating the air filter reduces the air flow restriction in the air intake system resulting in better combustion and less unburned components due to higher air availability. Higher air intake pressure is better at increasing the efficiency of combustion within a limited time to improve fuel economy, power output and exhaust emissions. Better combustion also leads to reduced unburned components such as carbon (C), hydrogen (H-2), carbon monoxide (CO) and hydroxide (OH), which results in cleaner emissions.
引用
收藏
页码:949 / 958
页数:10
相关论文
共 17 条
[1]  
Abdullah N., 2009, ENERGY
[2]   EXPERIMENTAL INVESTIGATION OF COLD START EMISSIONS USING ELECTRICALLY HEATED CATALYSTS IN A SPARK IGNITION ENGINE [J].
Bhaskar, K. ;
Nagarajan, G. ;
Sampath, S. .
INTERNATIONAL JOURNAL OF AUTOMOTIVE AND MECHANICAL ENGINEERING, 2010, 2 :105-118
[3]  
Cengel Y. A., 2007, THERMODYNAMICS ENG A, V6
[4]   Design of a new SI engine intake manifold with variable length plenum [J].
Ceviz, M. A. ;
Akin, M. .
ENERGY CONVERSION AND MANAGEMENT, 2010, 51 (11) :2239-2244
[5]   PERFORMANCE EVALUATION OF EXTERNAL MIXTURE FORMATION STRATEGY IN HYDROGEN-FUELED ENGINE [J].
Kamil, Mohammed ;
Rahman, M. M. ;
Bakar, Rosli A. .
JOURNAL OF MECHANICAL ENGINEERING AND SCIENCES, 2011, 1 :87-98
[6]   EMISSION AND COMBUSTION CHARACTERISTICS OF DIFFERENT FUELS IN A HCCI ENGINE [J].
Mohanamurugan, S. ;
Sendilvelan, S. .
INTERNATIONAL JOURNAL OF AUTOMOTIVE AND MECHANICAL ENGINEERING, 2011, 3 :279-292
[7]   OPERATING CHARACTERISTICS OF A VARIABLE COMPRESSION RATIO ENGINE USING ESTERIFIED TAMANU OIL [J].
Mohanraj, T. ;
Kumar, K. Murugu Mohan .
INTERNATIONAL JOURNAL OF GREEN ENERGY, 2013, 10 (03) :285-301
[8]  
Pulkrabek WW., 2004, ASME J ENG GAS TURBI, V126, P198, DOI [10.1115/1.1669459, DOI 10.1115/1.1669459]
[9]  
Radcliff R. B., 2009, SMALL ENGINES
[10]   INFLUENCE OF FUEL TEMPERATURE ON DIESEL ENGINE PERFORMANCE OPERATING WITH BIODIESEL BLEND [J].
Rahim, Rafidah ;
Mamat, Rizalman ;
Taib, Mohd Yusof ;
Abdullah, Abdul Adam .
JOURNAL OF MECHANICAL ENGINEERING AND SCIENCES, 2012, 2 :226-236