Wedge splitting test method: quantification of influence of glued marble plates by two-parameter fracture mechanics

被引：4
|
作者：
Seitl, S. [1 ,2 ]
Garcia, B. Nieto [1 ,3 ]
Merta, I. [4 ]
机构：
[1] VVI Inst Phys Mat, Acad Sci Czech Republ, Brno, Czech Republic
[2] Brno Univ Technol, Fac Civil Engn, Inst Struct Mech, Brno, Czech Republic
[3] Univ Oviedo, Dept Construct & Mfg Engn Campus Viesques, Gijon, Spain
[4] Univ Technol Vienna, Fac Civil Engn, Inst Bldg Construct & Technol, Vienna, Austria
来源：
FRATTURA ED INTEGRITA STRUTTURALE | 2014年 / Gruppo Italiano Frattura卷 / 30期
关键词：
Wedge splitting test; Stress intensity factor; T-stress; K-calibration curves; Concrete fracture test;
D O I：
10.3221/IGF-ESIS.30.23
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
In the present paper, the well-known wedge splitting test (WST) is applied on specimens with different geometries (S= 150, 200, 300 mm) and variants of the specimens' configurations. K-calibration (B-1) and T-stress (B-2) calibration curves for such specimens are introduced. The objective was to compare and discuss the values of the calibration curves dependent on the specimen's geometries and on three different specimens' configurations: homogenous specimen; specimen with marble plates forming the groove for load application and specimen with glued marble plates.
引用
收藏
页码：174 / 181
页数：8
相关论文
共 16 条
  • [1] Two-parameter fracture mechanical analysis of a near-crack-tip stress field in wedge splitting test specimens
    Seitl, Stanislav
    Vesely, Vaclav
    Routil, Ladislav
    COMPUTERS & STRUCTURES, 2011, 89 (21-22) : 1852 - 1858
  • [2] Quantification of the effect of specimen geometry on the fatigue crack growth response by two-parameter fracture mechanics
    Hutar, P
    Seitl, S
    Knésl, Z
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2004, 387 : 491 - 494
  • [3] A two-parameter fracture mechanics model for fatigue crack growth in brittle materials
    Kravchenko, Sergii G.
    Kravchenko, Oleksandr G.
    Sun, C. T.
    ENGINEERING FRACTURE MECHANICS, 2014, 119 : 132 - 147
  • [4] Evaluation of fracture properties of concrete using wedge splitting test method
    Ishiguro, Satoru
    Zairyo/Journal of the Society of Materials Science, Japan, 2003, 52 (09) : 1043 - 1048
  • [5] Two-parameter fracture criterion (Kρ,c-Tef,c) based on notch fracture mechanics
    Meliani, M. Hadj
    Matvienko, Y. G.
    Pluvinage, G.
    INTERNATIONAL JOURNAL OF FRACTURE, 2011, 167 (02) : 173 - 182
  • [6] Two-parameter fracture criterion (Kρ,c-Tef,c) based on notch fracture mechanics
    M. Hadj Meliani
    Y. G. Matvienko
    G. Pluvinage
    International Journal of Fracture, 2011, 167 : 173 - 182
  • [7] Drilling Repair Index (DRI) based on two-parameter fracture mechanics for crack arrest holes
    Nateche, T.
    Meliani, M. Hadj
    Matvienko, Y. G.
    Pluvinage, G.
    ENGINEERING FAILURE ANALYSIS, 2016, 59 : 99 - 110
  • [8] Fatigue-crack propagation near a threshold region in the framework of two-parameter fracture mechanics
    Seitl, Stanislav
    Hutar, Pavel
    MATERIALI IN TEHNOLOGIJE, 2007, 41 (03): : 135 - 138
  • [9] Fracture energy of coarse recycled aggregate concrete using the wedge splitting test method: influence of water-reducing admixtures
    Garcia-Gonzalez, J.
    Barroqueiro, T.
    Evangelista, L.
    de Brito, J.
    De Belie, N.
    Moran-del Pozo, J.
    Juan-Valdes, A.
    MATERIALS AND STRUCTURES, 2017, 50 (02)
  • [10] Numerical simulation of wedge splitting test method for evaluating fracture behaviour of self compacting concrete
    Rajeshwari, B. Raja
    Sivakumar, M. V. N.
    Asrith, P. Sai
    COMPUTERS AND CONCRETE, 2024, 33 (03) : 265 - 273
12