LIGHT-SCATTERING FROM GLOSSY COATINGS ON PAPER

The application of angle-resolved light scattering (ARLS) to the measurement of the surface roughness of glossy coatings on paper was investigated. To this end, ARLS patterns were measured for laser light scattered from several glossy paper samples, and these patterns were compared with those calculated using a theoretical model based on plane-wave scattering from an isotropic rough surface. Mechanical stylus profilometry data for the rms roughnesses and the autocorrelation functions of the coatings were used as input to calculate the patterns. For all the paper samples measured, as well as for all the incidence angles used, there was good agreement between the experimental and the calculated patterns when all the rms roughnesses measured by profilometry were reduced by 30%. The indication from these experiments is that ARLS may be used to determine the roughness parameters of the coatings. As a check on these results, measurements were also performed with a commercial optical surface probe; these data agreed well with both the ARLS and the stylus profilometry results.