BRAZILIN-TOLUIDINE BLUE O AND HEMATOXYLIN-DARROW RED METHODS FOR BRAIN AND SPINAL CORD

Tissue fixed in 10% formalin, formalin-95% ethanol 1:s CaCO2 or phosphate buffer neutralized formalin, or methanol-chloroform 2:1, was dehydrated and embedded in paraffin or double-embedded by infiltration in 1% celloidin followed by a chloroform-paraffin sequence. Sections were attached to slides with either albumen or gelatine adhesive and processed throughout at room temperature of 24-26 C. For either method, mordanting 30-60 min in 1% iron alum was followed by a 10 min wash in 4 changes of distilled water. For brazilin-toluidne blue O, myelin was stained for 20-60 min, depending upon section thickness, in a self-differentiating solution consisting of: 0.15% Li2CO3 75 ml; 6% brazilin in 95% ethanol, 25 ml; and NaIO3 75 mg. After a thorough washing, Nissl material was stained for 3-8 min in a solution consisting of: 0.1 M acetic acid, 90 ml; 0.1 M sodium acetate, 10 ml; and 1% toluidine blue 0, 2.5 ml. For hematoxylin-Darrow red, myelin was stained for 2-6 hr in a self-differentiating solution consisting of: 0.15% Li2,CO3 95 ml; 10% hematoxylin in 95% ethanol, 5 ml; and NaIO3 25 mg. After a thorough washing, Nissl material was stained for 20 min or less in a solution consisting of: 0.1 M acetic acid, 90 ml; 0.1 M sodium acetate, 10 ml; Darrow red, 25 mg. This mixture was first boiled, cooled to room temperature and filtered. In both methods, washing, dehydration, clearing, and mounting completed the process. In the brazilin-toluidine blue technic, myelin sheaths were stained reddish purple; neuronal nuclei light blue with dark granules of chromatin; nucleoli dark blue; and cytoplasm blue with dark blue Nissl granules. In the hematoxylin-Darrow red procedure, myelin sheaths were blue-black; nuclei light red with dark granules of chromatin; nucleoli almost black; and cytoplasm red with bright red Nissl granules. © 1969 Informa UK Ltd All rights reserved: reproduction in whole or part not permitted.