PARAMETRIC STUDY OF FACTORS AFFECTING FLEXIBLE-PAVEMENT PERFORMANCE

被引:18
作者
COLLOP, AC
CEBON, D
机构
[1] Dept. Of Engrg., Univ. Of Cambridge, Cambridge
来源
JOURNAL OF TRANSPORTATION ENGINEERING-ASCE | 1995年 / 121卷 / 06期
关键词
D O I
10.1061/(ASCE)0733-947X(1995)121:6(485)
中图分类号
TU [建筑科学];
学科分类号
0813 ;
摘要
A new whole-life pavement-performance model (WLPPM) that is capable of making deterministic pavement-damage predictions due to realistic traffic and environmental loading has been developed. A vehicle simulation is used to generate dynamic tire forces that are a function of distance along the pavement. These dynamic tire forces are then combined with the appropriate pavement primary-response influence functions to give primary-response histories at regularly spaced points along the pavement. The primary-response histories are then transformed into an increment of damage at each point along the pavement due to a single vehicle pass, and the surface-roughness profile is updated. This procedure is then repeated until pavement failure occurs. Using the WLPPM, the performance of two classes of pavement are examined operating under climatic conditions typical of the United Kingdom. It is concluded that both dynamic vehicle loads and asphalt-layer stiffness variations can significantly influence long-term flexible-pavement performance.
引用
收藏
页码:485 / 494
页数:10
相关论文
共 37 条
[1]  
Am. Assoc. of State Hwy. and Transp. Officials, 1, (1986)
[2]  
Barber E., Calculation of Maximum Pavement Temperatures from Weather Reports, Bull, (1957)
[3]  
Brademeyer B.D., Delatte N.J., Markow M.J., Analysis of Moving Dynamic Loads On Highway Pavements. Part II: Pavement Response, Int. Symp. On Heavy Vehicle Weights and Dimensions, the Roads and Transp. Assoc, pp. 381-393, (1986)
[4]  
Brown S.F., Material characteristics for analytical pavement design, Developments in Highway Pavement Engineering, (1978)
[5]  
Brown S.F., Brunton J.M., Improvements to pavement subgrade strain criterion, J. Transp. Engrg., ASCE, 110, 6, pp. 551-567, (1984)
[6]  
Brown S.F., Brunton J.M., An Introduction to the Analytical Design of Bituminous Pavements, (1992)
[7]  
Brown S.F., Brunton J.M., Stock A.F., The analytical design of bituminous pavements, Proc., ICE, 79, pp. 1-31, (1985)
[8]  
Cebon D., Interaction between heavy vehicles and roads, SAE SP-95I, 930001, Soc. Of Automotive Engrs. (SAE), (1993)
[9]  
Cebon D., Newland D.E., The Artificial Generation of Road Surface Topography by the Inverse FFT Method, Proc. 8Th IA VSD Symp. On the Dynamics of Vehicles On Roads and On Railway Tracks, Swets and Zeitliger, pp. 29-42, (1983)
[10]  
Cole D.J., Measurement and analysis of dynamic tyre forces generated by lorries, (1990)