STUDY OF ELECTROCHEMICALLY DEPOSITED THIN POLY(N-VINYLCARBAZOLE) FILMS

In this paper, the influence of the water content in the acetonitrile/LiClO4 system on the electrosynthesis and the properties of poly(N-vinylcarbazole), PNVC, films is examined. By using conventional resonant frequency and impedance measurements of an electrochemical quartz crystal microbalance (EQCM), information about the electrochemical, morphological and adhesive properties of the thin conducting films were obtained. By changing the water content of the background electrolyte, the degree of cross-linking (through the vinyl group), the doping level and the morphology of PNVC films vary simultaneously. Two limiting cases of film properties were observed: for less than 10 Vol.% water, a highly doped, porous and cross-linked polymer is synthesized. Above 10 Vol.% water content, a dense and smooth film is deposited. The growth at a constant potential was found to be limited by the diffusion of monomers to the electrode. Films grown from a system containing 20 Vol.% water exhibit better adhesive properties to the substrate than those grown from 2 Vol.% water.