CALCULATION AND PARAMETER SELECTION FOR CONVEYOR BELT

被引：0
|
作者：
Gregorovic, Tatjana [1 ]
Bognolo, Dario [1 ]
Krsulja, Marko [1 ]
机构：
[1] Polytech Rijeka, Vukovarska 58, Rijeka, Croatia
来源：
ZBORNIK VELEUCILISTA U RIJECI-JOURNAL OF THE POLYTECHNICS OF RIJEKA | 2014年 / 2卷 / 01期
关键词：
conveyor belt; coal dust; idlers; transportation;
D O I：
暂无
中图分类号：
C [社会科学总论];
学科分类号：
03 ; 0303 ;
摘要：
This paper presents the calculation for conveyor belt for continuous transportation of material. The investigated conveyor is designed for transportation of coal dust, the selected length of the conveyor belt being 300 meters with the rising angle of 10 degrees. The required carrying capacity was 150 tons per hour. All necessary functional components of the conveyor belt were calculated according to the standards, as well as the desired final output. The paper describes the process of selecting conveyor belt speed, belt width, the calculation of operating power, the choice of dimensions of the drive drum and bearing rollers. The standard model for belt conveyor calculation was used. The forces occurring in the process were investigated and the method of force contour calculation was used for control.
引用
收藏
页码：313 / 327
页数：15
相关论文
共 50 条
  • [21] Measurement of the Volume of Material on the Conveyor Belt Measuring of the Volume of Wood Chips During Transport on the Conveyor Belt using a laser scanning
    Fojtik, David
    2014 15TH INTERNATIONAL CARPATHIAN CONTROL CONFERENCE (ICCC), 2014, : 121 - 124
  • [22] Analysis of Dynamic Mechanic Belt Stresses of the Magistral Conveyor
    Pihnastyi, Oleh
    Khodusov, Valery
    Kozhevnikov, Georgii
    Bondarenko, Tetiana
    ADVANCED MANUFACTURING PROCESSES II, 2021, : 186 - 195
  • [23] Dynamic transition in conveyor belt driven granular flow
    Cordero, Manuel J.
    Pugnaloni, Luis A.
    POWDER TECHNOLOGY, 2015, 272 : 290 - 294
  • [24] Innovative Conveyor Belt Monitoring via Current Signals
    Gelman, Len
    Abdullahi, Abdulmumeen Onimisi
    Moshrefzadeh, Ali
    Ball, Andrew
    Conaghan, Gerard
    Kluis, Winston
    ELECTRONICS, 2023, 12 (08)
  • [25] Analysis of pipe conveyor belt damaged by thermal wear
    Fedorko, Gabriel
    Molnar, Vieroslav
    Dovica, Miroslav
    Toth, Teodor
    Kopas, Melichar
    ENGINEERING FAILURE ANALYSIS, 2014, 45 : 41 - 48
  • [26] The computational modelling of flame spread along a conveyor belt
    Lowndes, I. S.
    Silvester, S. A.
    Giddings, D.
    Pickering, S.
    Hassan, A.
    Lester, E.
    FIRE SAFETY JOURNAL, 2007, 42 (01) : 51 - 67
  • [27] A Sorting Algorithm for RFID Tags Moving on a Conveyor Belt
    Xu, Jie
    Yang, Li
    Liu, Qinshu
    Hu, Jing
    Song, Tiecheng
    2018 IEEE INTERNATIONAL CONFERENCE ON RFID (RFID), 2018,
  • [28] Use of simulation by modelling of conveyor belt contact forces
    Mikusova, Nikoleta
    Stopka, Ondrej
    Stopkova, Maria
    Opettova, Erika
    OPEN ENGINEERING, 2019, 9 (01): : 709 - 715
  • [29] Conveyor Belt Quality Assessment for In-House Logistics
    Fedorko, Gabriel
    Molnar, Vieroslav
    Dovica, Miroslav
    Toth, Teodor
    QUALITY-ACCESS TO SUCCESS, 2018, 19 (166): : 35 - 38
  • [30] AGGREGATED SEGMENTATION OF FISH FROM CONVEYOR BELT VIDEOS
    Chuang, Meng-Che
    Hwang, Jenq-Neng
    Rose, Craig S.
    2013 IEEE INTERNATIONAL CONFERENCE ON ACOUSTICS, SPEECH AND SIGNAL PROCESSING (ICASSP), 2013, : 1807 - 1811
12345